Toastmaster TRE36D, TRE36C manual Receiving the Range, Location, Un-crating, Installing the Legs

Receiving the Range

Upon receipt, check for freight damage, both visible and concealed. Note visible damage on the freight bill at the time of delivery and require the carrier’s agent to sign the freight bill. Concealed loss or damage means loss or damage, which does not become apparent until the merchandise has been unpacked. If concealed loss or damage is discovered upon unpacking, make a written request for inspection by the carrier’s agent within 15 days of delivery. Keep all packing material for inspection. Do not return damaged merchandise to Toastmaster. File your claim with the carrier.

Location

Prior to un-crating, move the range as near its intended location as practical.

The crating will help protect the unit from the physical damage normally associated with moving it through hallways and doorways.

The clearances to combustable surfaces must be maintained: 3 inches from the back & sides.

Un-crating

The unit will arrive unassembled inside a wood frame covered by cardboard box and strapped to a skid. Remove the cardboard cover, cut the straps and remove the wood frame.

	RANGE IS VERY HEAVY AND FOR SAFE HANDLING, INSTALLER SHOULD
	OBTAIN HELP AS NEEDED, OR EMPLOY APPROPRIATE MATERIALS
	HANDLING EQUIPMENT (SUCH AS A FORKLIFT, DOLLY, OR PALLET JACK)
CAUTION	TO REMOVE THE UNIT FROM THE SKID AND MOVE IT TO THE PLACE OF
	INSTALLATION.
	ANY STAND, COUNTER OR OTHER DEVICE ON WHICH RANGE WILL BE
	LOCATED MUST BE DESIGNED TO SUPPORT THE WEIGHT OF THE OVEN.
CAUTION	SHIPPING STRAPS ARE UNDER TENSION AND CAN SNAP BACK WHEN CUT.

Remove range from skid and place in intended location.

Installing the Legs

Legs ship standard with all ranges.

To install the 6-inch legs, remove the legs from the packing, place some cardboard on the floor and gently tip the oven onto its back. Fasten the legs into the threaded holes provided and then gently flip the oven onto its legs.

IL2023

2M-W1624 TM 36” RANGE OP MANUAL