Quick Start Guide
PPPInternet Connection and Public IP Address Routing
PPPInternet Connection and
Public IP Address Routing
Router in Slot 1
ISP Router that provides the Internet connection.
Command
set clock1 a:1 set 1 default disconnect a:1
disconnect 1
set a:1:all type data connect a:1:all 1:1:1
rename 1 "LocalUnit" "Boulder"
rename 1 "RemoteUnit" "wan1"
set 1:1 ip address 215.168.21.14 255.255.255.0
add 1 "wan1" static ip network
0.0.0.00.0.0.0 1
set 1 "wan1" trunk 1
reset 1
Description
Set primary master transmit clock source
Set Router to default settings
Disconnect all connections to the T1 on the Controller (slot a)
Disconnect all connections to the router in slot 1
Set the
Connect all of
Rename the from "LocalUnit" (default) to "Boulder" (LAN)
Rename WAN #1 from "RemoteUnit" (default) to "wan1"
Set the ethernet IP address, in the conventional IP address format. (Router LAN)
Adds a static IP network (route) to the WAN interface
Set the WAN interface named "wan1" to be mapped to trunk 1
Reboot the router, to enable all configurations set
IP Router - Release 1.8 | 5 |