Carrier Access 002-0118-0180 guide

Internet Connection using NAT and Static NAT Addresses

Internet Connection using NAT and

ISP Router that provides the Internet connection. Router with NAT and Static NAT addresses.

set clock1 a:1

set 1 default

disconnect a:1

disconnect 1

set a:1:all type data

connect a:1:all 1:1:1

rename 1 "LocalUnit" "Boulder"

rename 1 "RemoteUnit" "wan1"

set ethernet ip address 192.168.21.15 255.255.255.0

set 1:1 ip address 192.168.21.14 255.255.255.0

set 1 "wan1" nat enable

set 1 "wan1" nat address 216.174.44.2 1

add 1 "wan1" static ip network

0.0.0.00.0.0.0 1

add 1 "wan1" static nat address 192.168.21.14 216.174.44.232

Set primary master transmit clock source

Set Router to default settings

Disconnect all connections to the T1 on the Controller (slot a)

Disconnect all connections to the router in slot 1

Set the T1-1 of the Controller, Type to Data

Connect all of T1-1 to the Router that is in slot 1

Rename the from "LocalUnit" (default) to "Boulder" (LAN)

Rename WAN #1 from "RemoteUnit" (default) to "wan1"

Set the Ethernet IP address and Subnet Mask, for the

Set the ethernet IP address, in the conventional IP address format. (Router LAN)

Set the WAN interface named "wan1" enable NAT mapping

Set the WAN interface named "wan1" NAT address

Adds a static IP network (route) to the WAN interface

Add static NAT bi-directional mapping to wan1

IP Router - Release 1.8