Datalogic Scanning QS2500 manual Installation, Keyboard Wedge, Wand Emulation, RS-232

Page 5

Installation

Complete the following steps for the appropriate interface.

Keyboard Wedge

1.Turn off the terminal or computer.

2.Disconnect the keyboard cable from the back of the terminal or computer.

3.Connect the QS2500 to the terminal or computer using the appro- priate interface cable.

4.Turn the terminal or computer back on.

Wand Emulation

1.Turn off the terminal or computer.

2.Connect the appropriate interface cable to the terminal or com- puter.

3.Turn the terminal or computer on.

RS-232

1.Turn off the terminal or computer.

2.Connect the interface cable and the external power supply (DC adapter) shipped with your QS2500. If a power-off-terminal (POT) cable is shipped, no external power supply is required.

3.Secure the connector to the serial port on the back of the computer or terminal by tightening the two screws.

4.If required, plug the power supply into the power source.

5.Turn the terminal or computer on.

Product Reference Guide

1

Image 5

Contents QuickScan QS2500 Datalogic Scanning, Inc Table of Contents Appendix E Alphanumeric Characters Keyboard Wedge InstallationWand Emulation RS-232USB Scan the alphanumeric characters located in Appendix E Programming the QS2500Interfaces Resetting the QS2500Option Bar Code QS2500 Option Option Alphanumeric Default Option Bar Code Alphanumeric RS-232 Advanced Features Response Delay IBM Interface 46XX/USB IBM 46xx Code 39 Conversion IBM OptionsIBM Host Commands Same Bar Code Delay Time Scanning ModeScanning Standby DurationDouble Confirm Option Disable Inverted Image Scan Enable Beep/Tone/LED Settings Beep & LED after decode Label Editing includes Prefix/Suffix Option Bar Code Alphanumeric Insert Data Group Disable ID Transmission Enable UPC-A Symbology SettingsUCC/EAN UPC-E Truncate Ending FfH Ascii code EAN-13 Disable Checksum Transmission Enable EAN-8 Ascii Code Use Global Min Minimum Code Length Interleaved 2 Use Global Min Code Length Industrial 2 Matrix 2 Ff hexB Codabar ABCD/ABCD Data Checksum UCC/EAN-128 Disable Append Enable Ff hex Ascii Enable two digits Data Digits Variable Checksum1 Optional MSI/Plessey Mini UK/Plessey Alphanumeric Telepen Standard 2 Disable Enable Code 16K Ff hex Italian PharmaCode RSS Expanded RSS Limited RSS-14 Checksum Code Code Type Appendix Default SettingsEAN-8 Appendix B Bar Code SamplesMatrix 2 Codabar Code Italian PharmaCode RSS Expanded RSS Limited RSS-14 Appendix C Ascii Codes Example Ascii a = Start Program Standard Parameter Setting List Appendix D Parameter Setting ListAppendix E Alphanumeric Characters QS2500 Page Italy