Datalogic Scanning QS2500 manual IBM Options, IBM 46xx Code 39 Conversion

Page 18

IBM Options

IBM 46xx Code 39 Conversion

This feature enables/disables the scanner’s ability to set the symbology identifier for the specified symbology to Code 39 before sending the label data to an IBM host. This applies to: Code 128, Code 93 and Codabar for IBM Port 5B; Code 93 and Codabar for IBM Port 9B.

This feature is for IBM port 5B and IBM port 9B.

NOTES

IBM-USB Device Type

The IBM-USB protocol allows for the scanner to be identified as one of two different types of barcode scanners. Depending on what other scan- ners you may already have connected to a IBM-USB POS, you may need to change this setting to enable all scanners to communicate. Options are:

•Table Top Scanner

•Handheld Scanner

This feature applies only to the IBM USB interface.

NOTES

IBM Maximum Host-Transmitted Message Length

Specifies the maximum number of data characters allowed in messages transmitted to an IBM host.

If this configuration item is set to zero, there is no general length limit imposed on data being transmitted to the host.

NOTES

14

QS2500

Image 18

Contents QuickScan QS2500 Datalogic Scanning, Inc Table of Contents Appendix E Alphanumeric Characters Wand Emulation InstallationKeyboard Wedge RS-232USB Programming the QS2500 Scan the alphanumeric characters located in Appendix EResetting the QS2500 InterfacesOption Bar Code QS2500 Option Option Alphanumeric Default Option Bar Code Alphanumeric RS-232 Advanced Features Response Delay IBM Interface 46XX/USB IBM Options IBM 46xx Code 39 ConversionIBM Host Commands Scanning Scanning ModeSame Bar Code Delay Time Standby DurationDouble Confirm Option Disable Inverted Image Scan Enable Beep/Tone/LED Settings Beep & LED after decode Label Editing includes Prefix/Suffix Option Bar Code Alphanumeric Insert Data Group Disable ID Transmission Enable Symbology Settings UPC-AUCC/EAN UPC-E Truncate Ending FfH Ascii code EAN-13 Disable Checksum Transmission Enable EAN-8 Ascii Code Use Global Min Minimum Code Length Interleaved 2 Use Global Min Code Length Industrial 2 Matrix 2 Ff hexB Codabar ABCD/ABCD Data Checksum UCC/EAN-128 Disable Append Enable Ff hex Ascii Enable two digits Data Digits Variable Checksum1 Optional MSI/Plessey Mini UK/Plessey Alphanumeric Telepen Standard 2 Disable Enable Code 16K Ff hex Italian PharmaCode RSS Expanded RSS Limited RSS-14 Appendix Default Settings Checksum Code Code TypeAppendix B Bar Code Samples EAN-8Matrix 2 Codabar Code Italian PharmaCode RSS Expanded RSS Limited RSS-14 Appendix C Ascii Codes Example Ascii a = Appendix D Parameter Setting List Start Program Standard Parameter Setting ListAppendix E Alphanumeric Characters QS2500 Page Italy