ConnectPRO PR14KIT warranty Buzzers and Beeps, Hot-Key Commands

Buzzers and Beeps

Whenever a command or event is initiated, either a buzzer or beep will sound to indicate a successful or failed command.

Abuilt-in buzzer generates a high-pitch beep for correct hot-key command; otherwise, one low-pitch beep for error

Hot-Key Commands

TO SELECT A PORT:

In a single master configuration, press and release the left CTRL key twice, followed by the keys that represent the number of the port that has the computer.

For example, to select a computer that is connected to port 5, press and release the left CTRL key twice, then press the #5 key once.

CTRL

,

CTRL

,

5

In a cascade configuration (master/slave), press and release the left CTRL key twice, followed by the number key that represents the port on the master that is being used to daisy-chain, then press the number key that represent the port on the slave that the computer is connected to.

For example, to select a computer that is connected to port # 8 of a slave, when port # 1 of the master is used to daisy-chain, press and release the left CTRL key twice, then press and release the #1 key, then press and release the #8 key.

CTRL

,

CTRL

,

1,

8

12