To Adjust the Keyboard Typematic Rate | ConnectPRO PR14KIT guide

TO ADJUST THE KEYBOARD TYPEMATIC RATE:

To adjust keyboard typematic rate (characters/sec), press and release the left CTRL key twice, followed by the F4 key once.

CTRL

Each time this key sequence is entered,1 to 4 beeps will sound corresponding to 10, 15, 20 and 30 characters/sec respectively.

This typematic setting will override the typematic settings of the computers’ BIOS and the operating system.

TO INITATE AUDIO-STICK:

To initiate or deactivate the Audio-Stick feature, press and release the left CTRL key twice, followed by the F5 key once.

CTRL

Each time this hot-key sequence in entered, an ON or OFF state is initiated and 1 or 2 beeps will sound corresponding to ON or OFF respectively. This hot-key sequence facilitates the optional MAV-108 multi-media module which would be LINKed to a designated MASTER unit of a Master-IT PRO configuration.

When set to ON, audio selection follows computer selection. When set to OFF, audio selection stops following computer selection. This allows the operator to listen to a particular computer's audio signals while operating other computers.