ConnectPRO PR14KIT warranty Single Master Configuration, Single Console Connection

Page 7

Single Master Configuration

A Single Master configuration involves only one Master-IT PRO KVM switch into which the PS/2 keyboard, monitor and PS/2 mouse are directly connected as well as the computers.

Connecting a PS/2 keyboard, a PS/2 mouse and a monitor directly to the designated CONSOLE ports of any Master-IT PRO model will automatically configure that KVM switch as the master. (There are two sets of console ports on the PR-28for two sets of PS/2 keyboards, mice and monitors).

Once the console ports are occupied, connect multiple sets of premium 3-in-1 cables (Part #: PS-1P) to the computer ports of the Master-IT PRO to complete a Single Master configuration. See figure 1.

Figure 1. Single Console Connection

7

Image 7
Contents Limited Warranty Introduction Appendix Introduction FeaturesOverview Configurations Installation Overview InstallationComponents Single Console Connection Single Master ConfigurationCascade Configuration Master/Slave Cascade ConfigurationExternal Power Supply Dual-Console ConfigurationMulti-Media Module optional Rack-Mount Kit Side Brackets Rack-Mount Kit optionalOperation Front Panel LED IndicatorsFront Panel Buttons Buzzers and Beeps Hot-Key CommandsTo Initiate or Deactivate AUTO-SCAN To Adjust the Keyboard Typematic Rate To Exit OSD On-Screen-Display OSDOn-Screen-Display To Lock a Device with a Password Appendix Symptoms Causes Solutions TroubleshootingScan mode Cannot switch to PR-12 PR-14 PR-18 PR-116 PR-28 PR-216 Specifications