Setting the Parameters
If you wish to change the default parameters shown and configure the mandatory parameters, we recommend that you use the Command Line Interface (CLI).
!For further information, please refer to Chapter 6 of the Avaya P330 User’s Guide.
Default Switch Parameters
Configuration Parameter | Default Setting |
Avaya P330 IP Address | 149.49.32.134 |
BootP Mode | Never |
Default Gateway | 0.0.0.0 |
Management PC SLIP IP Address | 192.168.10.2 |
VLAN Management ID | 1 |
Spanning Tree | Enabled |
TFTP Mode | Limited |
TFTP Server | 0.0.0.0 |
TFTP File Name | viisa |
|
|
Default Port Parameters
Configuration Parameter | Default Setting |
|
|
Port Speed and Duplex Mode | • |
|
|
| • |
|
|
| • |
|
|
Flow Control | • 10/100 and 100 Mbps: Disabled |
|
|
|
| ||
| • 1000 Mbps: Disabled (no pause) |
|
|
Backpressure | • 10/100: Enabled (when in half duplex mode) |
| 5 |
| • |
| |
• |
| ||
| • |
|
|
| • |
|
|
|
|
| |
Administration State | Enabled |
|
|
Port VLAN ID | 1 |
|
|
Tagging Mode | Clear |
|
|
Port Priority | Regular |
|
|
|
|
|
|