Edimax Technology EW-7205APS user manual 1b Windows

Page 9

Wireless LAN Access Point Configuration

•IP Address: Select Specify an IP Address. Specify the IP Address and Subnet Mask as following example.

IP Address: 192.168.2.3 (any IP address within 192.168.2.2~192.168.2.254 is available, do not setup 192.168.2.1)

Subnet Mask: 255.255.255.0

8.Reboot the PC. Your PC will now have the IP Address you specified.

1b) Windows 2000

1.Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear.

2.Double-clickNetwork and Dial-up Connections icon. In the Network and Dial-up Connection window, double-clickLocal Area Connection icon. The Local Area Connection window will appear.

3.In the Local Area Connection window, click the Properties button.

4.Check your list of Network Components. You should see Internet Protocol [TCP/IP] on your list. Select it and click the Properties button.

5.In the Internet Protocol (TCP/IP) Properties window, select Use the following IP address and specify the IP Address and Subnet mask as following.

IP Address: 192.168.2.3 (any IP address within 192.168.2.2~192.168.2.254 is available, do not setup 192.168.2.1)

Subnet Mask: 255.255.255.0

6.Click OK to confirm the setting. Your PC will now have the IP Address you specified.

1c) Windows NT

1.Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear.

2.Double-click Network icon. The Network window will appear. Select the Protocol tab from the Network window.

3.Check if the TCP/IP Protocol is on your list of Network Protocols. If TCP/IP is not installed, click the Add button to install it now. If TCP/IP is installed, go to step 5.

4.In the Select Network Protocol window, select the TCP/IP Protocol and click the Ok button to start installing the TCP/IP protocol. You may need your Windows CD to complete the installation.

5.After you install TCP/IP, go back to the Network window. Select TCP/IP from the list of Network Protocols and then click the Properties button.

6.Check each of the tabs and verify the following settings:

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Wireless LAN Access Point with 5-Port Switch Table of Contents Introduction Package ContentsSpecifications FeaturesFront Panel Physical DescriptionBack Panel DescriptionIntroduction Hardware Installation is complete Connect your PCs to the Wireless LAN Access Point directlyFrom Wired Station Default IP Address Default SubnetGetting Started 1b Windows Wireless LAN Access Point Configuration Configuring the Access Point From Wireless StationSystem Information Transmission Rate Channel and EssidBasic Rate EncryptionChannel HiddenWEP Mode Wireless LAN Access Point Configuration MAC Address Filtering Ieee Radius Server Session Idle Timeout Enable IeeeRe-Authentication Period Quiet PeriodTiny Server Setting Radius Server Setting New/EditEdit/Delete System Utility New Password Current PasswordRe-Enter Password Idle Time OutDhcp Server Dhcp Server SettingDefault Gateway IP Domain Name Server IP Start IP/End IP Dhcp Client LogDomain Name Lease Time Dhcp Client Log Configuration ToolsConfiguration Tools Firmware UpgradeFirmware Upgrade ResetReset What is Ad-hoc? How to manually find your PC’s IP and MAC Address?What is Infrastructure? What is BSS ID?What is a MAC Address? What is WEP?
Top Page Image Contents