Edimax Technology EW-7205APS user manual Introduction

Introduction

Antenna Connector

This round connection is standard Reverse SMA connector where any antennas with Reverse SMA connector can connect to the Access Point.

DC Adapter Port

Insert the power jack of the power adapter into this port.

10/100Mbps

The Access Point’s LAN ports are where you connect your LAN’s PCs.

Uplink Port

Using this port connects to Ethernet network devices, such as a hub, switch, or router directly.

Reset

The Reset button allows you to do one of two things.

1)If problems occur with your Access Point, press the reset button with a pencil tip (for less than 4 seconds) and the Access Point will re-boot itself, keeping your original configurations.

2)If problems persist or you experience extreme problems or you forgot your password, press the reset button for longer than 4 seconds and the Access Point will reset itself to the factory default settings (warning: your original configurations will be replaced with the factory default settings).

4