Edimax Technology EW-7205APS user manual Firmware Upgrade, Configuration Tools

Page 27

Wireless LAN Access Point Configuration

Parameter	Description
Configuration Tools	Use the "Backup" tool to save the Access Point’s current configuration to
	a file named "backup_config.exe" on your PC. You can then use the
	"Restore" tool to restore the saved configuration to the Access Point.
	Alternatively, you can use the "Restore to Factory Default" tool to force
	the Access Point to perform a power reset and restore the original factory
	settings.
	Note: Click More Configuration button after making a selection and
	follow the instructions.

3.2.9 Firmware Upgrade

This page allows you to upgrade the Access Point’s firmware.

25

Image 27

Contents Wireless LAN Access Point with 5-Port Switch Table of Contents Introduction Package ContentsSpecifications FeaturesDescription Physical DescriptionFront Panel Back PanelIntroduction Hardware Installation is complete Connect your PCs to the Wireless LAN Access Point directlyFrom Wired Station Default IP Address Default SubnetGetting Started 1b Windows Wireless LAN Access Point Configuration Configuring the Access Point From Wireless StationSystem Information Transmission Rate Channel and EssidHidden EncryptionBasic Rate ChannelWEP Mode Wireless LAN Access Point Configuration MAC Address Filtering Ieee Radius Server Quiet Period Enable IeeeSession Idle Timeout Re-Authentication PeriodTiny Server Setting Radius Server Setting New/EditEdit/Delete System Utility Idle Time Out Current PasswordNew Password Re-Enter PasswordDhcp Server Dhcp Server SettingDefault Gateway IP Domain Name Server IP Start IP/End IP Dhcp Client LogDomain Name Lease Time Dhcp Client Log Configuration ToolsConfiguration Tools Firmware UpgradeFirmware Upgrade ResetReset What is BSS ID? How to manually find your PC’s IP and MAC Address?What is Ad-hoc? What is Infrastructure?What is a MAC Address? What is WEP?