Edimax Technology BR-6004 user manual Primary Setup

Page 16

4.4 Primary Setup

This option is primary to enable this product to work properly. The setting items and the web appearance depend on the WAN type. Choose correct WAN type before you start.

1.LAN IP Address: this product’s IP address. The default address is 192.168.123.254. You can change it on your need.

2.WAN Type: WAN connection type of your ISP. You can click Change button to choose a correct one from the following four options:

A.Static IP Address: ISP assigns you a static IP address.

B.Dynamic IP Address: Obtain an IP address from ISP automatically.

C.PPP over Ethernet: Some ISPs require the use of PPPoE to connect to their services.

D.Dial-up Network: To surf the Internet via PSTN/ISDN.

-15-

Image 16

Contents Broadband Router Copyright TrademarksFCC Interference Statement CE Declaration of ConformityTable of Contents Functions and Features Introduction耟Access Control supported Packing List耟Virtual Server supported 耟User-Definable Application Sensing TunnelHardware Installation Panel LayoutFront Panel Rear PanelInstallation Requirements Procedure for Hardware InstallationSetup of WAN connections for this product Power onPage Network Settings and Software Installation Make correct network settings of your computerPage Configuring IP Sharer Start-up and LogStatus Toolbox Primary Setup Static IP Address Dynamic IP AddressPPP over Ethernet Dial-up NetworkDhcp Server Virtual Server Special AP Access Control Misc Items Appendix a Console Mode Appendix B TCP/IP Configuration for Windows 95/98 Install TCP/IP protocol into your PCSet TCP/IP protocol for working with IP Sharer Page Don’t input any value in the Gateway tab Choose Disable DNS in the DNS Configuration tab