Edimax Technology BR-6004 user manual Appendix a Console Mode

Page 23

Appendix A Console Mode

When you forget the system password or the IP address of this product, you need enter console mode to reset them.

Before invoking the console program, be sure to find a null modem cable and use it to connect from this product’s COM port to your computer’s COM port. Then, execute a terminal program, such as the Hyper Terminal of MS Windows 95. The connection parameters should be set to 19200 8-N-1. And, reboot this product. When the M1 indicator starts flashing regularly, you can press the “Enter” key of the keyboard several times, there should be some messages and console prompt ">" appeared in the terminal.

In the console mode, you may reset the IP address and the system password of this product. Please remember to execute the SR command to save the changes you have made. For example,

IP 192.168.123.254

PW admin

SR

-22-

Image 23

Contents Broadband Router Trademarks CopyrightCE Declaration of Conformity FCC Interference StatementTable of Contents Introduction Functions and Features耟User-Definable Application Sensing Tunnel 耟Access Control supportedPacking List 耟Virtual Server supportedRear Panel Hardware InstallationPanel Layout Front PanelProcedure for Hardware Installation Installation RequirementsPower on Setup of WAN connections for this productPage Make correct network settings of your computer Network Settings and Software InstallationPage Start-up and Log Configuring IP SharerStatus Toolbox Primary Setup Dial-up Network Static IP AddressDynamic IP Address PPP over EthernetDhcp Server Virtual Server Special AP Access Control Misc Items Appendix a Console Mode Install TCP/IP protocol into your PC Appendix B TCP/IP Configuration for Windows 95/98Set TCP/IP protocol for working with IP Sharer Page Don’t input any value in the Gateway tab Choose Disable DNS in the DNS Configuration tab