Edimax Technology BR-6641 user manual Configuration File, Maintenance

BR-6641 User Manual

Log on to Web UI as the Administrator and go to function [System]→ [Administration].

Use [Browse...] to select the path to the new firmware image, then select [Upload].

The firmware update will take a while so be patient. During the update process BE SURE not to turn off the system or pull the power plug. You should also NOT click on [Upload] button.

Note:Update will succeed when ¬the “Update succeeded” message appears. At this time please power off and then on again the system to restart BR-6641 with the new firmware.

Configuration File:

Push Save button to save current configuration into a file. Push Restore button to restore the configuration back from a saved configuration file. See Appendix 2 for more information.

Log into BR-6641 as Administrator. In the Web UI, go to [System]→ [Administration] and select [Configuration File] → [Save] to backup the Config File to your local machine/notebook.

To restore to the previously saved config file, go to [Configuration File] → [Restore], select [Browse...] to pick the saved config file and select [Upload]. Notice: DO NOT to turn off the power during the config file upload process, or repetitively select the [Upload] button.

Restart BR-6641 to effect the configuration.

Maintenance:

Push Factory Default button to reset BR-6641 configuration to its factory default. You can do the same operation using resetconfig command in console. Push reboot button to reboot BR-6641.

24