Edimax Technology BR-6641 user manual Virtual Server Field Value Description, Wan Ip

BR-6641 User Manual

Virtual Server :

Field		Value	Description
When		Busy	There are three options available: Busy hour, idle hour,
		Idle	and All-times. Please refer to	Chapter 2
		All-Time	[System]→[ Date/Time] for setting up the	definition of
			busy or idle hours.
WAN IP		<WAN IP>	To the users from the Internet, your virtual server is
			visible as a public IP on the WAN port.
			This WAN IP is the “visible” IP for your virtual server in
			the external environment (Internet). You must specify a
			public IP if your WAN type is “Routing Mode”. If the WAN
			type is “Bridge Mode One Static IP”, your WAN IP in this
			field should be the public IP assigned from your ISP. Or,
			if your WAN type is none of the above, then choose
			“dynamic IP at WAN”.
Service		FTP(21)	The services, which are predefined in [Service Name],
		SSH (22)	will be matched. For example:
		TELNET(23)	FTP(21): The packets, whose predefined TCP port
		H323 (1720)	number in [Service Name] is 21, are to be match.
			Protocol Number: Define the Protocol Number, then the
		Protocol Number
			packets with the Protocol Number are to be defined.
		ICMP@
			ICMP @: Define the Type value, then	the packets,
		TCP@
			whose ICMP take this Type value, will be defined.
		UDP@
			TCP/UDP @: The TCP/UDP service type to be matched.
		<Service	You can select the matching criteria from the publicly
		Grouping Name>	known service types (e.g. FTP), or you can choose the
		Any	port number in TCP/UDP packet. To specify a range of
			port numbers, type starting port number plus hyphen
			“-“and ending port number. e.g. “TCP@123-234”.
			Group: The packets from the group which are predefined
			in [Service Grouping].
			Any: All packets are to be matched
Server IP		<Server IP>	The original IP address of your virtual server. It can be a
			private IP in the LAN or a public IP in DMZ.
Server Port		Port Number	Input the Port Number of Server IP.
L og		Enable	Enable: the logging will be enabled. Whenever the rule
		Disable	is matched, the system will write the event to the log file.
			Disable: No log will be generated.
	Table 4.3 The Description of the Fields on Virtual Server Page

61