3.7 Service Grouping
This function allows you to assign a name to a group of TCP ports, UDP ports, and/or ICMP. Later on when you are asked to specify a port, you can use the name of the service group instead. The name of a service group will automatically show up in the port selection list if the service group is enabled.
Figure 3.20 The Location of “System / Service Grouping” on the Menu Bar
Service Grouping:
Field | Value | Description |
|
|
|
Group Name | <name> | Input the group name, e.g. MSN File |
|
| Transfer, then it will appear in the |
|
| service menu and relevant options. |
|
| Note: You can set at most 5 groups. |
Service | ICMP | Define the assigned TCP, UDP, and |
| TCP@ | ICMP as a group for the usage in the |
51