Edimax Technology BR-6641 user manual WAN Link Health Detection, Basic Setting Field

					BR-6641 User Manual
Basic Setting:
	Field		Value		Description
	Down Stream				The down stream (inbound) bandwidth of the
					WAN link, for example 25600 (Kbps).
	Up Stream				The up stream (outbound) bandwidth of the
					WAN link, for example 25600 (Kbps).
	Port Speed	Auto			The speed and duplex of WAN Port. You can
		10Mbps/Half duplex			set it manually or system can got it
		10Mbps/Full duplex			automatically.
		100Mbps/Half
		duplex
		100Mbps/Full duplex
	Health	Never			This function is used to configure the WAN
	Detection	Always			link health detection mechanism for the
		Only	when	no	specific WAN link.
		packet is received
	Address	IP Address			Input the IP Address of BR-6641 in WAN. It
		IP Range			can be:
					IP Address
					IP Range
	Gateway				Input the predefined Gateway, e.g.:
					211.21.40.254.
	Subnet Mask				Input the Subnet Mask.
	IP(s) in DMZ	IP Address			Input the IP Address of BR-6641 in DMZ. It
		IP Range			can be:
					IP Address
					IP Range

Table 3.1 Standard Mode / Basic Setting

WAN Link Health Detection:

This function allows MIS to configure how WAN link health detection is performed. By fine-tuning certain parameters, an MIS can adjust BR-6641 to match a particular network structure and/or a particular ISP.

For WAN link health detection, BR-6641 sends out ICMP or TCP packets and monitors responses to determine the statuses of those links. In the WAN Link

29