Edimax Technology BR-6104KP user manual 2d Windows NT

Page 10

2d) Windows NT

1:Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear.

2:Double-click Network icon. The Network window will appear. Select the Protocol tab from the Network window.

3:Check if the TCP/IP Protocol is on your list of Network Protocols. If TCP/IP is not installed, click the Add button to install it now. If TCP/IP is installed, go to step 5.

4:In the Select Network Protocol window, select the TCP/IP Protocol and click the Ok button to start installing the TCP/IP protocol. You may need your Windows CD to complete the installation.

5:After you install TCP/IP, go back to the Network window. Select TCP/IP from the list of Network Protocols and then click the Properties button.

6:Check each of the tabs and verify the following settings:

•IP Address: Select Obtain an IP address from a DHCP server.

•DNS: Let all fields are blank.

•WINS: Let all fields are blank.

•Routing: Let all fields are blank.

7:Click OK to confirm the setting. Your PC will now obtain an IP address automatically from your Broadband Router’s DHCP server.

Note: Please make sure that the Broadband router’s DHCP server is the only DHCP server available on your LAN.

Once you’ve configured your PC to obtain an IP address automatically, please proceed to Step 3.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents User’s Manual Page Page Introduction FeaturesPackage Content Minimum RequirementsLocal Area Network LAN ResetFront Panel Wide Area Network WANSetup Diagram Below shows a typical setup for a Local Area Network LANConfigure your PC to obtain an IP address automatically Getting started2b Windows XP 2c Windows 2d Windows NT Page Quick Setup Wizard General SetupChapter Quick Setup Time ZoneCable Modem Broadband TypeCable Modem Fixed-IP xDSLFixed-IP xDSL DNSPptp PPPoEMTU BEZEQ-ISRAEL Will automatically disconnect the connection with your ISPLAN Chapter General SettingsWAN NATStart Daylight Savings SystemTime End Daylight Savings Time Password Settings Remote Management WANPPPoE PPP over Ethernet Dynamic IPStatic IP Address 5 L2TPL2TP server Telstra Big Pond 7 DNSDdns LANNAT IP Address PoolPort Forwarding Virtual Server Example Virtual Server Special Applications Example ALG SettingsExample Special Applications UDPFirewall Access ControlFilter client PCs by IP Filter client PC by MAC Add PCExample Access Control Intrusion Detection Feature Denial of Service DoSURL Blocking 4 DMZ ISPStatus and Information Chapter StatusInternet Connection Device Status Security LogActive Dhcp Client Table StatisticsConfiguration Tools Chapter ToolFirmware Upgrade ResetFor BR-6104KP only Install Print Server Network Driver Page Add a Network Printer Page Appendix a How to Manually find your PC’s IP and MAC addressGlossary Snmp UCP TCP FTP Smtp POP3Http TCP Pptp
Top Page Image Contents