Edimax Technology BR-6104KP user manual Bezeq-Israel

Parameter	Description
Obtain an IP address	The ISP requires you to obtain an IP address by DHCP automatically efore connecting to
	the PPTP server.
Use the following IP	The ISP gives you a static IP to be used to connect to the PTP server.
address
IP Address	This is the IP address that your ISP has given you to establish a PPTP connection.
Subnet Mask	Enter the Subnet Mask provided by your ISP
	(e.g. 255.255.255.0)
Gateway	Enter the IP address of the ISP Gateway
User ID	Enter the User Name provided by your ISP for the PPTP connection. Sometimes called a
	Connection ID
Password	Enter the Password provided by your ISP for the PPTP connection
PPTP Gateway	If your LAN has a PPTP gateway, then enter that PPTP gateway IP address here. If you do
	not have a PPTP gateway then enter the ISP’s Gateway IP address above
Connection ID	This is the ID given by ISP. This is optional.
BEZEQ-ISRAEL	Select this item if you are using the service provided by BEZEQ in Israel.
	If you select “Continuous”, the router will always connect to the ISP. If the WAN line breaks
	down and links again, the router will auto-reconnect to the ISP.
	If you select “Connect On Demand”, the router will auto-connect to the ISP when someone
	want to use the Internet and keep connected until the WAN idle timeout. The router will
Connection Type	close the WAN connection if the time period that no one is using the Internet exceeds the
	“Idle Time”.
	If you select “Manual”, the router will connect to ISP only when you click “Connect” manually
	from the Web user interface. The WAN connection will not disconnected due to the idle
	timeout. If the WAN line breaks down and latter links again, the router will not auto-connect
	to the ISP.
	You can specify an idle time threshold (minutes) for the WAN port. This means if no packets
	have been sent (no one using the Internet) throughout this specified period, then the router
	will automatically disconnect the connection with your ISP.
	Note: This “idle timeout” function may not work due to abnormal activities of some network
Idle Time	application software, computer virus or hacker attacks from the Internet. For example, some
	software sends network packets to the Internet in the background, even when you are not
	using the Internet. So please turn off your computer when you are not using it. This function
	also may not work with some ISP. So please make sure this function can work properly
	when you use this function in the first time, especially your ISP charge you by time used.

Click <OK> when you have finished the configuration above. Congratulations! You have completed the configuration for the PPTP connection. You can start using the router now, if you wish to use some of the advance features supported by this router see chapter 2, 3, 4.

17