Chapter Tool, Configuration Tools | Edimax Technology BR-6104K

Chapter 4 Tool

This page includes the basic configuration tools, such as Configuration Tools (save or restore configuration settings), Firmware Upgrade (upgrade system firmware) and Reset.

	Parameter		Description
	Configuration Tools		You can save the router’s current configuration, restore the router’s saved configuration
	Configuration Tools		files and restore the router’s factory default settings
			files and restore the router’s factory default settings

	Firmware Upgrade		This page allows you to upgrade the router’s firmware

	Reset		You can reset the router’s system should any problem exist

Select one of the above three Tools Settings selection and proceed to the manual’s relevant sub-section

4.1 Configuration Tools

The Configuration Tools screen allows you to save (Backup) the router’s current configuration setting. Saving the configuration settings provides an added protection and convenience should problems occur with the router and you have to reset to factory default. When you save the configuration setting (Backup) you can re-load the saved configuration into the router through the Restore selection. If extreme problems occur you can use the Restore to Factory Defaults selection, this will set all configurations to its original default settings (e.g. when you first purchased the router).

Parameter	Description
	Use the "Backup" tool to save the Broadband router current configuration to a file named
	"config.bin" on your PC. You can then use the "Restore" tool to restore the saved
Configuration Tools	configuration to the Broadband router. Alternatively, you can use the "Restore to
	Factory Defaults" tool to force the Broadband router to perform a power reset and
	restore the original factory settings.