Sherwood RVD-9090R Specifications, Amplifier Section, Digital Audio Section, Video Section

ENGLISH

Specifications

AMPLIFIER SECTION

Power output, stereo mode, 8 Ω, THD 0.2%, 40 Hz~20 kHz	.................................................................................. 2 100 W
Total harmonic distortion, 8 Ω, 100 W, 1 kHz	0.09%
Intermodulation distortion
60 Hz : 7 kHz= 4 : 1 SMPTE, 8 Ω, 100 W	0.07%
Input sensitivity, 47 kΩ
Line (CD, TAPE, VCR)	200 mV
Signal to noise ratio, IHF A weighted
Line (CD, TAPE, VCR)	95 dB
Frequency response
Line (CD, TAPE, VCR), 10 Hz~60 kHz	+0 dB, -3 dB
Output level
TAPE REC, 2.2 kΩ	200 mV
PRE OUT(Front, Center, Rear, Subwoofer), 1 kΩ	1.0 V
Bass/Treble control, 100 Hz/10 kHz	10 dB
Surround mode, only channel driven
Front power output, 8 Ω, 1 kHz, THD 0.7 %	105 W+105 W
Center power output, 8 Ω, 1 kHz, THD 0.7 %	105 W
Rear power output, 8 Ω, 1 kHz, THD 0.7 %	105 W+105 W

DIGITAL AUDIO SECTION

Sampling frequency	32, 44.1, 48 kHz
Digital input level
Coaxial, 75 Ω	0.5 Vp-p
Optical, 660 nm	-15~-21 dBm

VIDEO SECTION

Television format	NTSC
Input sensitivity(=Output level), 75
Video(Composite (normal))	1	Vp-p
S-video(luminance signal)	1	Vp-p
(chrominance signal)	0.286	Vp-p

FM TUNER SECTION

Tuning frequency range	87.5~108 MHz
Usable sensitivity, THD 3%, S/N 30 dB	11.2 dBf
50 dB quieting sensitivity, mono/stereo	15.2/38.2 dBf
Signal to noise ratio, 65 dBf, mono/stereo	70/68 dB
Total harmonic distortion, 65 dBf,1 kHz, mono/stereo	0.2/0.3 %
Frequency response, 30 Hz~15 kHz	1.5 dB
Stereo separation, 1 kHz	45 dB
Capture ratio	1.25 dB
IF rejection ratio	120 dB

AM TUNER SECTION

Tuning frequency range	520~1710 kHz
Usable sensitivity	500 V/m
Signal to noise ratio, 80 dB/m	45 dB
Selectivity	30 dB

GENERAL

Power supply	AC 120 V, 60 Hz
Power consumption	2.8 A
Switched AC outlet	TOTAL 1 A, 100 W max.
Dimensions (W H D)	440 140 380 mm(17-3/8 5-1/2 15 inches)
Weight (Net)	11 kg(24.3 lbs)

Note: Design and specifications are subject to change without notice for improvements.

28