Discs for playback
This system can play all digital audio CD, finalized digital audio
Loading the CD Changer
1Press CD to select CD mode.
2Press OPEN•CLOSE.
™ The CD carousel tray slides out.
3Load a CD with the printed side up in the right tray.
•You can load another disc in the left tray.
•To load the third disc, press the DISC CHANGE button.
™The CD carousel tray will rotate until the empty tray is ready for loading.
4Press OPEN•CLOSE to close the CD carousel tray.
™The total number of tracks and the playing time of the selected disc appear on the display.
Note:
–To ensure good system performance, wait until the CD changer completely reads the disc(s) before proceeding.
CD Direct Play
•You can play a CD directly by pressing the DISC 1, DISC 2 or DISC 3 button. The CD player will stop at the end of playback of the selected disc.
™A lit button indicates that a disc is loaded in the disc tray.
™A flashing button indicates that a disc is playing.
Playing a CD
1PressÉto start playback.
™The disc tray, track number and elapsed playing time of the current
track appear on the display.
•To interrupt playback, pressÅ.
™The playing time flashes.
•To resume playback, pressÉagain.
2 To stop playback, press Ç.
Note:
–All the available discs will play once, then stop.
Disc Change
You can change the outer two discs while the third inner disc is stopped or is playing.
1Press DISC CHANGE.
™ The CD carousel tray slides out.
2Replace the discs in the left and right disc trays.
•If you press DISC CHANGE again during playback, the CD will stop playing.
™The CD carousel tray will rotate until the inner tray is rotated out and is
ready for changing.
3Press OPEN•CLOSE to close the CD carousel tray.
Selecting a desired track
Selecting a desired track when playback is stopped
1Press íor ëuntil the desired track appears on the display.
2PressÉto start playback.
™The selected track number and elapsed playing time appear on the display.
Selecting a desired track during playback
•Press íor ëuntil the desired track appears on the display.
™The selected track number and elapsed playing time appear on the display.
•If you press íonce it will skip to the beginning of the current track and play the track again.
Note:
–Pressingíduring shuffling can only skip to the beginning of the current track.
CD
Searching for a particular passage during playback
•Press and hold àor áuntil the desired passage is located.
™ The volume will be reduced.
•Play returns to normal when àor á is released.
Programming Tracks
Programming tracks of a loaded CD is possible when playback is stopped. The display will indicate the total tracks stored in the program. Up to 40 tracks can be stored in the memory in any order. When 40 tracks are stored and you attempt to store another track, the display will show “PROGRAM FULL”.
1Load the desired discs in the disc trays.
2Press PROGRAM to start programming.
™The PROG flag starts flashing.
™It will cancel any previously selected repeat mode.
3Press the CD (CD 1•2•3) or DISC 1/2/3 button to select the disc.
4Pressíor ëto select the desired track.
5Press PROGRAM to store the track.
•Repeat steps 3 to 5 to store other discs
and tracks.
6Press Çonce to end programming.
™The total number of tracks programmed and total playing time appear on the display.
English
13
13 | 12/12/00, 6:33 PM | 3139 116 19381 |