Edimax Technology BR-6204WG manual From network loop happened

		from network loop happened in the
		LAN ports.
DHCP Server	Enabled	You can enable or disable the
		DHCP server. By enabling the
		DHCP server the router will
		automatically give your LAN clients
		an IP address. If the DHCP is not
		enabled then you’ll have to
		manually set your LAN client’s IP
		addresses; make sure the LAN
		Client is in the same subnet as this
		broadband router if you want the
		router to be your LAN client’s
		default gateway
Lease Time		The DHCP when enabled will
		temporarily give your LAN clients an
		IP address. In the Lease Time
		setting you can specify the time
		period that the DHCP lends an IP
		address to your LAN clients. The
		DHCP will change your LAN client’s
		IP address when this time threshold
		period is reached
IP Address Pool		You can select a particular IP
		address range for your DHCP
		server to issue IP addresses to your
		LAN Clients.

Note: By default the IP range is from: Start IP 192.168.2.100 to End IP 192.168.2.199. If you want your PC to have a static/fixed IP address then you’ll have to choose an IP address outside this IP address Pool

Domain Name You can specify a Domain Name for your LAN

Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)

43