Edimax Technology BR-6204WG manual

Page 25

ParameterDescription

Obtain an IP address

The ISP requires you to obtain an IP address by

 

DHCP automatically before connecting to the PPTP

 

server.

Use the following

The ISP give you a static IP to be used to connect

IP address

to the PPTP server.

IP Address

This is the IP address that your ISP has given you

.

to establish a PPTP connection

 

Subnet Mask

Enter the Subnet Mask provided by your ISP (e.g.

 

255.255.255.0)

Gateway

Enter the IP address of the ISP Gateway

User ID

Enter the User Name provided by your ISP for the

 

PPTP connection. Sometimes called a Connection

 

ID

Password

Enter the Password provided by your ISP for the

 

PPTP connection

 

24

Image 25
Contents Page Linux Open Source Code Installation FCC Caution Safety Page NAT Package Content FeaturesMinimum Requirements Get to know the Broadband Router Back Panel ResetLocal Area Network LAN Wide Area Network WANLight Status Description Front PanelConfigure your PC to obtain an IP address automatically Setup DiagramGetting started 2a Windows 95/98/Me DNS Configuration Select Disable DNS2b Windows XP 2c Windows IP Address Select Obtain an IP address from a Dhcp server 2d Windows NTPage General Setup Chapter Quick Setup Wizard ChapterStatus Info. Chapter System Tools ChapterTime Zone Quick SetupBroadband Type L2TP PptpCable Modem DNS Fixed-IP xDSLMTU PPPoEPptp Page BEZEQ-ISRAEL L2TP This is optional. You can specify the maximum size Telstra Big Pond Turn OFF the Router When YOU Finished Using the InternetGeneral Settings LAN WANNAT System System SettingsTime Zone Password Settings Remote Management WAN Wireless ISP Page Page Static IP Address Dynamic IPPPPoE PPP over Ethernet 6 L2TP8 DNS Ddns LAN IP LANFrom network loop happened Basic Settings WirelessSetting Wlan MAC EssidAdvanced Settings Page Security IappWEP only 3.2 802.1x only WPA Pre-shared key 3.3 802.1x WEP Static keyWPA2AES WpatkipWPA Radius Access Control QoS Page Edit QoS Rule Will apply to. You can assign a single port number NAT Port Forwarding Page Virtual Server Page Special Applications Example Virtual ServerPage Example Example Special ApplicationsUPnP Settings ALG Settings Static Routing Firewall Access Control Rule for users by IP addresses Add PC Example Access Control Client PC ServiceURL Blocking Intrusion Detection Feature DoS Denial of Service4 DMZ Status Status and Information Primary DNS and Secondary DNS being used Internet ConnectionDevice Status System Log Security Log Active Dhcp Client Statistics Tool Restore to Factory Defaults tool to force Configuration ToolsFirmware Upgrade Perform a reset. Your settings will not be Appendix a How to Manually find your PC’s IP and MAC address Glossary Page TCP TCP FTP Smtp POP3Snmp UCP UDP