Edimax Technology BR-6204WG manual

ParametersDescription

Enable Virtual Server	Enable Virtual Server.
Private IP	This is the LAN client/host IP address that the
	Public Port number packet will be sent to.
	Note: You need to give your LAN PC clients a
	fixed/static IP address for Virtual Server to work
	properly.
Private Port	This is the port number (of the above Private IP
	host) that the below Public Port number will be
	changed to when the packet enters your LAN (to
	the LAN Server/Client IP)
Type	Select the port number protocol type (TCP, UDP
	or both). If you are unsure, then leave it to the
	default both protocol.
Public Port	Enter the service (service/Internet application)
	port number from the Internet that will be re-
	directed to the above Private IP address host in
	your LAN
	Note: Virtual Server function will have priority
	over the DMZ function if there is a conflict
	between the Virtual Server and the DMZ settings.
Comment	The description of this setting.
Add Virtual Server	Fill in the "Private IP", "Private Port", "Type",
	“Public Port” and "Comment" of the setting to be
	added and then click "Add". Then this Virtual
	Server setting will be added into the "Current
	Virtual Server Table" below. If you find any typo
	before adding it and want to retype again, just
	click "Clear" and the fields will be cleared.
Remove Virtual Server	If you want to remove some Virtual Server
	settings from the " Current Virtual Server Table",
	select the Virtual Server settings you want to
	remove in the table and then click "Delete
	Selected". If you want remove all Virtual Server
	63