Edimax Technology BR-6204WG manual

Page 62

ParameterDescription

Enable Port Forwarding	Enable Port Forwarding
Private IP	This is the private IP of the server behind the
	NAT firewall.
	Note: You need to give your LAN PC clients a
	fixed/static IP address for Port Forwarding to
	work properly.
Type	This is the protocol type to be forwarded. You
	can choose to forward “TCP” or “UDP” packets
	only or select “both” to forward both “TCP” and
	“UDP” packets.
Port Range	The range of ports to be forward to the private
	IP.
Comment	The description of this setting.
Add Port Forwarding	Fill in the "Private IP", “Type”, “Port Range”
	and	"Comment" of the setting to be
	added and then click "Add". Then this Port
	Forwarding setting will be added into the
	"Current Port Forwarding Table" below. If you
	find any typo before adding it and want to
	61

Image 62

Contents Page Linux Open Source Code Installation FCC Caution Safety Page NAT Minimum Requirements FeaturesPackage Content Local Area Network LAN ResetGet to know the Broadband Router Back Panel Wide Area Network WANFront Panel Light Status DescriptionGetting started Setup DiagramConfigure your PC to obtain an IP address automatically DNS Configuration Select Disable DNS 2a Windows 95/98/Me2b Windows XP 2c Windows 2d Windows NT IP Address Select Obtain an IP address from a Dhcp serverPage Status Info. Chapter Quick Setup Wizard ChapterGeneral Setup Chapter System Tools ChapterQuick Setup Time ZoneBroadband Type Pptp L2TPCable Modem Fixed-IP xDSL DNSPPPoE MTUPptp Page BEZEQ-ISRAEL L2TP This is optional. You can specify the maximum size Turn OFF the Router When YOU Finished Using the Internet Telstra Big PondGeneral Settings NAT WANLAN System Settings SystemTime Zone Password Settings Remote Management WAN Wireless ISP Page Page PPPoE PPP over Ethernet Dynamic IPStatic IP Address 6 L2TP8 DNS Ddns LAN LAN IPFrom network loop happened Setting WirelessBasic Settings Essid Wlan MACAdvanced Settings Page Iapp SecurityWEP only 3.2 802.1x only 3.3 802.1x WEP Static key WPA Pre-shared keyWpatkip WPA2AESWPA Radius Access Control QoS Page Edit QoS Rule Will apply to. You can assign a single port number NAT Port Forwarding Page Virtual Server Page Example Virtual Server Special ApplicationsPage Example Special Applications ExampleUPnP Settings ALG Settings Static Routing Firewall Access Control Rule for users by IP addresses Add PC Client PC Service Example Access ControlURL Blocking DoS Denial of Service Intrusion Detection Feature4 DMZ Status Status and Information Internet Connection Primary DNS and Secondary DNS being usedDevice Status System Log Security Log Active Dhcp Client Statistics Tool Configuration Tools Restore to Factory Defaults tool to forceFirmware Upgrade Perform a reset. Your settings will not be Appendix a How to Manually find your PC’s IP and MAC address Glossary Page Snmp UCP TCP FTP Smtp POP3TCP UDP