CyberPower CS150U48V3 operation manual Installation Wall Mounting the UPS, Tighten the 4 screws

Page 10

4.4 Installation

4.4.1 Wall Mounting the UPS

1.

Remove the UPS from the carton.

2.

Get the wall mount kit.

3.

Use the nuts included in the kit.

 

Attach both wall mount brackets to

 

the threaded posts on the back side

 

of the UPS enclosure as shown on

 

the right.

4.

Reference the Wall Mount Chart

 

(scaled-down) in Appendix I to

 

mark the four mounting hole

 

locations.

5.

Pre-drill the marked hole locations

 

to a suitable size (M8 is

 

recommended) for the fasteners

 

being used.

6.

Install the fasteners and mount the

 

UPS to the wall.

4.4.2 Pole Mounting the UPS (Optional)

Wall Mount

Bracket Post

Poll Mount

Bracket Post

Figure 7: Wall Mount Kit

Poll Mount

Bracket (Left)

1.

Remove the UPS from the carton.

2.

Get the pole mount kit (ordered

 

separately)

3.

Using the nuts included in the kit,

 

attach the left and right pole mount

 

brackets to the threaded posts on

Center Bracket

Poll Mount Bracket (Right)

 

the back side of the UPS

 

enclosures as shown.

4.

Thread the (4) M8 x 25L hex head

 

screws with a lock washer and flat

 

head washer onto the center pole

 

mount bracket.

5.

Using pole mount straps (not

 

provided), attach the center bracket

 

to the pole.

6.

Hang the UPS (batteries not

 

installed) onto the center poll mount

 

bracket which is already on the poll.

7.

Tighten the 4 screws.

Note: Using stainless or galvanized steel straps with a width of 1-inch is recommended.

"Warning: Risk of Electric Shock. Mount the unit at a height greater than 25cm from the ground surface."

Tread screw and two washers onto center bracket

Figure 8: Pole Mount Kit

Figure 9: Pole Mounting Diagram

© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners.

Page: 9 of 17

Image 10
Contents CS150U48V3 Table of Figures Table of Tables General Description Electrical WarningsBattery Warnings Limited WarrantyFCC Notice Dimensions Installation OverviewPrior to Installation UnpackingInstallation Wall Mounting the UPS Tighten the 4 screwsBattery Type Installing the Battery Trays Battery ReplacementBattery Heater BTH-150-8X Optional Connecting to Power Source Installing the Power CordOutdoor Power Cord Selection ONT Alarm Connections Start-UpIndicator Color Condition Controls and Operational LEDsAlarms Condition Status LED Alarm Interface DescriptionSpecifications Appendix I Wall Mount Chart Recommended Screw Dimensions M8 x 25L or 3/8 x 1L

CS150U48V3 specifications

The CyberPower CS150U48V3 is an advanced uninterruptible power supply (UPS) that caters to both home and business environments, providing reliable backup power and surge protection. It is designed to ensure that vital electronic devices remain operational during power outages, fluctuations, and surges, thereby safeguarding valuable data and equipment.

One of the main features of the CS150U48V3 is its robust battery backup capacity. With an estimated runtime of up to 1500 watts and an internal battery capable of supporting various devices, this UPS delivers a consistent power supply during emergencies. The unit's ability to maintain power allows users to save their work or perform a safe shutdown of their systems, reducing the risk of data loss.

In addition to its backup capabilities, the CS150U48V3 integrates advanced surge protection technology. It employs high-energy MOV (metal oxide varistor) components that absorb excess voltage spikes, shielding connected devices from potential damage. This feature is essential, especially in areas prone to electrical storms or voltage fluctuations, ensuring that computers, networking equipment, and other electronic devices remain protected.

Another key characteristic of the CyberPower CS150U48V3 is its compact design. This UPS is engineered to fit easily into various spaces, whether it is beneath a desk or in a server rack. The unit also comes equipped with multiple outlets, allowing users to connect several devices simultaneously, thus enhancing efficiency and utility.

The CS150U48V3 also supports user-friendly features such as LED status indicators that provide real-time information on battery capacity, load status, and overall power health. Users can monitor their power system quickly, ensuring that they remain aware of operational conditions.

Additionally, this UPS is equipped with a user-replaceable battery, simplifying maintenance and extending the service life of the unit. The inclusion of USB connectivity allows for communication with computers running power management software, enabling automatic shutdown during extended outages.

Overall, the CyberPower CS150U48V3 offers a combination of essential features and advanced technologies that ensure optimal protection and reliable performance for sensitive electronic equipment. With its powerful backup system, surge protection, user-friendly design, and comprehensive features, it stands as an ideal choice for both home offices and small businesses looking to maintain operational continuity without interruptions.