CyberPower CS150U48V3 operation manual ONT Alarm Connections, Start-Up

Page 14

4.8ONT Alarm Connections

1.Route the 7-wire cable back from the ONT enclosure to the UPS.

2.Remove any convenient 3/4” knock-out of the UPS enclosure.

3.Install a strain relief in the knock-out hole.

4.Route the power cable up through the strain relief.

5.Trim the cable to the desired length and strip back approximately 2” of the jacket.

6.Using a jeweler’s standard blade screwdriver, attach the wires to the connector referencing the ONT pin-out information.

7.Tighten the strain relief around the power cord.

Note: Be certain to utilize environmentally sealed strain-reliefs, cordgrips, or conduit at the cable exit point.

Note: Output wires should be installed in accordance with Article 800 of ANSI/NFPA 70.

Figure 16: LED’s and ONT Alarm Connections

5 OPERATION

5.1Start-Up

1.Supply AC power.

2.During initial start-up, observe the following:

a.The AC/DC Mode LED illuminates (Green). The UPS is running on AC (utility) power and the batteries are charging.

b.The DC Output LED illuminates (Green). The UPS is outputting DC power to the ONT.

3.Route and secure the cables to the wire management brackets.

4.Close and latch the front cover of the UPS.

© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners.

Page: 13 of 17

Page 13 Page 15
Image 14
Page 13 Page 15
Contents CS150U48V3 Table of Figures Table of Tables General Description Electrical WarningsBattery Warnings Limited WarrantyFCC Notice Dimensions Installation OverviewPrior to Installation UnpackingInstallation Wall Mounting the UPS Tighten the 4 screwsBattery Type Installing the Battery Trays Battery ReplacementBattery Heater BTH-150-8X Optional Connecting to Power Source Installing the Power CordOutdoor Power Cord Selection ONT Alarm Connections Start-UpIndicator Color Condition Controls and Operational LEDsAlarms Condition Status LED Alarm Interface DescriptionSpecifications Appendix I Wall Mount Chart Recommended Screw Dimensions M8 x 25L or 3/8 x 1L

CS150U48V3 specifications

The CyberPower CS150U48V3 is an advanced uninterruptible power supply (UPS) that caters to both home and business environments, providing reliable backup power and surge protection. It is designed to ensure that vital electronic devices remain operational during power outages, fluctuations, and surges, thereby safeguarding valuable data and equipment.

One of the main features of the CS150U48V3 is its robust battery backup capacity. With an estimated runtime of up to 1500 watts and an internal battery capable of supporting various devices, this UPS delivers a consistent power supply during emergencies. The unit's ability to maintain power allows users to save their work or perform a safe shutdown of their systems, reducing the risk of data loss.

In addition to its backup capabilities, the CS150U48V3 integrates advanced surge protection technology. It employs high-energy MOV (metal oxide varistor) components that absorb excess voltage spikes, shielding connected devices from potential damage. This feature is essential, especially in areas prone to electrical storms or voltage fluctuations, ensuring that computers, networking equipment, and other electronic devices remain protected.

Another key characteristic of the CyberPower CS150U48V3 is its compact design. This UPS is engineered to fit easily into various spaces, whether it is beneath a desk or in a server rack. The unit also comes equipped with multiple outlets, allowing users to connect several devices simultaneously, thus enhancing efficiency and utility.

The CS150U48V3 also supports user-friendly features such as LED status indicators that provide real-time information on battery capacity, load status, and overall power health. Users can monitor their power system quickly, ensuring that they remain aware of operational conditions.

Additionally, this UPS is equipped with a user-replaceable battery, simplifying maintenance and extending the service life of the unit. The inclusion of USB connectivity allows for communication with computers running power management software, enabling automatic shutdown during extended outages.

Overall, the CyberPower CS150U48V3 offers a combination of essential features and advanced technologies that ensure optimal protection and reliable performance for sensitive electronic equipment. With its powerful backup system, surge protection, user-friendly design, and comprehensive features, it stands as an ideal choice for both home offices and small businesses looking to maintain operational continuity without interruptions.
Top Page Image Contents