CyberPower CS150U48V3 operation manual Unpacking, Prior to Installation

Page 9

4.2Unpacking

Inspect the Battery Backup Unit upon receipt. The box should contain the following:

•Battery Backup Power Supply Unit x 1

•Battery Shelves x 2

–Battery Tray x 2

–Battery Tray Clamp x 2

–M4 x 8 Truss head Screws x 8 (secure clamp to shelf)

–M4 x 8 Truss head Screws x 4 (secure shelf to enclosure)

•Accessory Pack

–Terminal Connectors x 2

–Cable Ties x 6

–Battery Terminal Jumper x 6

–Battery Wire Harness Assemblies x 2

–User’s Manual x 1

•Wall Mount Kit

–Wall Mount Bracket x 2

–M8 Flange Nut x 4

•(OPTIONAL) Pole Mount Kit

–Pole Mount Bracket x 3

–M8 Flange Nut x 6

–M8 x 25L Hex Head Screws (clamp center bracket to side brackets) x 4

–M8 Lock Washers x 4

–M8 Flat Washers x 4

•(OPTIONAL) Battery Heater

–Battery Heater Sheet x 1

–Circuit Breaker with Outlet x 1

4.3Prior to Installation

Installation of the unit must be performed by skilled technicians and electricians familiar with electrical equipment. Do not allow unqualified personnel to handle, install, or operate the equipment. The installation must comply with both the requirements of the National Electrical Code (ANSI/NFPA 70, latest issue), and local codes.

CAUTION: When batteries are installed in the UPS, the total weight will exceed 50 pounds. Make sure the fasteners used to attach to the wall are of sufficient strength to securely hold the UPS.

© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners.

Page: 8 of 17

Page 8 Page 10
Image 9
Page 8 Page 10
Contents CS150U48V3 Table of Figures Table of Tables Electrical Warnings General DescriptionLimited Warranty Battery WarningsFCC Notice Dimensions Overview InstallationUnpacking Prior to InstallationTighten the 4 screws Installation Wall Mounting the UPSInstalling the Battery Trays Battery Replacement Battery TypeConnecting to Power Source Installing the Power Cord Battery Heater BTH-150-8X OptionalOutdoor Power Cord Selection Start-Up ONT Alarm ConnectionsControls and Operational LEDs Indicator Color ConditionCondition Status LED Alarm Interface Description AlarmsSpecifications Recommended Screw Dimensions M8 x 25L or 3/8 x 1L Appendix I Wall Mount Chart

CS150U48V3 specifications

The CyberPower CS150U48V3 is an advanced uninterruptible power supply (UPS) that caters to both home and business environments, providing reliable backup power and surge protection. It is designed to ensure that vital electronic devices remain operational during power outages, fluctuations, and surges, thereby safeguarding valuable data and equipment.

One of the main features of the CS150U48V3 is its robust battery backup capacity. With an estimated runtime of up to 1500 watts and an internal battery capable of supporting various devices, this UPS delivers a consistent power supply during emergencies. The unit's ability to maintain power allows users to save their work or perform a safe shutdown of their systems, reducing the risk of data loss.

In addition to its backup capabilities, the CS150U48V3 integrates advanced surge protection technology. It employs high-energy MOV (metal oxide varistor) components that absorb excess voltage spikes, shielding connected devices from potential damage. This feature is essential, especially in areas prone to electrical storms or voltage fluctuations, ensuring that computers, networking equipment, and other electronic devices remain protected.

Another key characteristic of the CyberPower CS150U48V3 is its compact design. This UPS is engineered to fit easily into various spaces, whether it is beneath a desk or in a server rack. The unit also comes equipped with multiple outlets, allowing users to connect several devices simultaneously, thus enhancing efficiency and utility.

The CS150U48V3 also supports user-friendly features such as LED status indicators that provide real-time information on battery capacity, load status, and overall power health. Users can monitor their power system quickly, ensuring that they remain aware of operational conditions.

Additionally, this UPS is equipped with a user-replaceable battery, simplifying maintenance and extending the service life of the unit. The inclusion of USB connectivity allows for communication with computers running power management software, enabling automatic shutdown during extended outages.

Overall, the CyberPower CS150U48V3 offers a combination of essential features and advanced technologies that ensure optimal protection and reliable performance for sensitive electronic equipment. With its powerful backup system, surge protection, user-friendly design, and comprehensive features, it stands as an ideal choice for both home offices and small businesses looking to maintain operational continuity without interruptions.
Top Page Image Contents