Outdoor Power Cord Selection | CyberPower CS150U48V3 specs

4.7.2Outdoor Power Cord Selection

1.If an outdoor AC Line cord is selected to connect the unit to AC wall outlet, be sure that the selection criterion in the following table are fully complied.

Cord Rating	Wire (AWG)	Outdoor Use	Attachment Plug	Flexible Cord Type
Three conductors,	Check	Use cord type with	15A, 125V (NEMA	SP-2, SPE-2, SPT-2,
current rating 10A,	specifications of	the suffix "W", "W-A"	5-15P) or 15A, 250V	NISP-2, NISPE-2,
VW-1, 105℃,	liquid tight cable	or the words "Water	(NEMA 6-15P)	NISPT-2, SP-3, SPE-3,
VW-1, 105℃,	liquid tight cable	or the words "Water	(NEMA 6-15P)	SPT-3
125/250V	gland to determine	resistant" or		SPT-3
125/250V	gland to determine	resistant" or		SV, SVE, SVO, SVOO,
	the outside	"Outdoor" marked on		SV, SVE, SVO, SVOO,
	the outside	"Outdoor" marked on		SVT, SVTO, SVTOO
	diameter of the	the flexible cord		SVT, SVTO, SVTOO
	diameter of the	the flexible cord		SJ, SJE, SJO, SJOO,
	wire.			SJ, SJE, SJO, SJOO,
	(O.D. > 6.8mm;			SJT, SJTO, SJTOO
	(O.D. > 6.8mm;
	18AWG min. for			S, SE, SO, SOO, ST,
	each inner wire)			STO, STOO

Table 3: AC Line Cord

2.The connection of the power cord should also be in accordance with Article 110.14 of ANSI/NEPA 70.

3.Using pin terminals (as shown in the Figure 14) for the power cord at the end connected to terminal strip is recommended.

"Warning - Risk of Electric Shock. Connect plug of outdoor power cord only to a covered Class A GFCI receptacle that has an enclosure that is weatherproof with the attachment plug cap inserted or removed."

4. If conduit is used, be sure to choose wires in accordance with the following criterion.

Wire Gauge	Wire Type	Tightening Torque	Minimum temperature
(AWG)		(lb-in)	rating of conductors

10-18 AWG	Copper conductors	7	75°C
Copper Conductors

Table 4: Conduit Wires

"Warning - Risk of Electric Shock. Install wires going through conduit only on a circuit protected by a Class A GFCI."

"Warning: Power supply cord must not be attached to the building surface, nor run through walls, ceilings, floors and similar openings in the building structure."

"Warning: The socket outlet shall be installed near the equipment and shall be easily accessible."

"Warning: To reduce the risk of fire, connect the unit only to a circuit provided with Listed 20 Amperes circuit breaker in accordance with the National Electrical Code, ANSI/NFPA."

Note: Wiring, liquid tight fittings, conduit and cable glands shall be selected in accordance with Article 300 of ANSI/NFPA 70.

Note: Before installing the unit, confirm that there is listed IEC 61643-12 or UL1449 low surge protective device with surge protection level less than 2.5KV being connected between the unit and the power source.

Note: Surge Arrestors or Transient Voltage Surge Suppressor external to the equipment to reduce overvoltages or to bypass surge current shall be installed per Article 280 or 285 of ANSI/NFPA 70.

Note: Be certain to keep coolant or oil away from the unit.

Page: 12 of 17

CS150U48V3 specifications

The CyberPower CS150U48V3 is an advanced uninterruptible power supply (UPS) that caters to both home and business environments, providing reliable backup power and surge protection. It is designed to ensure that vital electronic devices remain operational during power outages, fluctuations, and surges, thereby safeguarding valuable data and equipment.

One of the main features of the CS150U48V3 is its robust battery backup capacity. With an estimated runtime of up to 1500 watts and an internal battery capable of supporting various devices, this UPS delivers a consistent power supply during emergencies. The unit's ability to maintain power allows users to save their work or perform a safe shutdown of their systems, reducing the risk of data loss.

In addition to its backup capabilities, the CS150U48V3 integrates advanced surge protection technology. It employs high-energy MOV (metal oxide varistor) components that absorb excess voltage spikes, shielding connected devices from potential damage. This feature is essential, especially in areas prone to electrical storms or voltage fluctuations, ensuring that computers, networking equipment, and other electronic devices remain protected.

Another key characteristic of the CyberPower CS150U48V3 is its compact design. This UPS is engineered to fit easily into various spaces, whether it is beneath a desk or in a server rack. The unit also comes equipped with multiple outlets, allowing users to connect several devices simultaneously, thus enhancing efficiency and utility.

The CS150U48V3 also supports user-friendly features such as LED status indicators that provide real-time information on battery capacity, load status, and overall power health. Users can monitor their power system quickly, ensuring that they remain aware of operational conditions.

Additionally, this UPS is equipped with a user-replaceable battery, simplifying maintenance and extending the service life of the unit. The inclusion of USB connectivity allows for communication with computers running power management software, enabling automatic shutdown during extended outages.

Overall, the CyberPower CS150U48V3 offers a combination of essential features and advanced technologies that ensure optimal protection and reliable performance for sensitive electronic equipment. With its powerful backup system, surge protection, user-friendly design, and comprehensive features, it stands as an ideal choice for both home offices and small businesses looking to maintain operational continuity without interruptions.