Freedom9 KVM-08H, KVM-16H Remote Console, Extending your computer console up to 500 feet away

Page 10

Chapter 2: Hardware Installation

Step 3

Connect the keyboard to the KVM Switch. If you have an AT type keyboard, you will need an AT to PS/2 adapter.

Step 4

Connect the mouse to the KVM Switch.

Step 4-1 (Remote Console)

Extending your computer console up to 500 feet away:

(1)Make sure the CAT5 cable used is a straight through type. (see page 5)

(2)Plug one end of the CAT5 cable into the RJ-45 connector of the PS/2 KVM switch and the other end into KVM CAT5 receiver RJ-45 port.

(3)Connect remote keyboard, mouse and monitor with PS/2-EXTENDER-RECEIVER “KB“, “MS“ and “Monitor” interface.

(4)Connect CAT5 receiver computer port with computer console port by using 3 to 3 KVM cable.

7

Image 10

Contents Stackable TWO-CONSOLE Port / 16 portFreedom9 Inc. 1 Year Limited Warranty Table of Contents Introduction Features Model No. Two-console 16 port PS/2 KVM SwitchAll Female Types Console Port Connector Local Console Model No Two-Console 16 port PS/2 KVM Switch Daisy Chain Cable PS/2 Cable Cable Diagrams Computer Port Special CableAT to PS/2 keyboard adapter Optional VGA CableStep Hardware InstallationLocal Console Remote Console Extending your computer console up to 500 feet awayOptional Hardware Installation Master Bank Slave Bank Maximum 8 Levels Console Operation Selecting Computer Using Hot Key Below are the hot key commands listSelecting Computer through Hot Key Example ExampleHot Plug Function OSD Operation Details Press Insert key for editing computer name Use up arrow key or down arrow key to select KVM portUse PgUp or PgDn key for selecting previous or next Bank No Press Tab key to select Bank, OSD, Scan…etcConsole Operation Troubleshooting Certifications CE CertificatePage Freedom9 Inc