Freedom9 KVM-08H, KVM-16H user manual Console Operation

Page 20

Chapter 3: Console Operation

OSD OPERATION Details continued

1.The “OSD: 10 SEC” means that the OSD windows display or computer system name will display for 10 sec. on your monitor. You can modify it from 05 sec to 99 sec. The factory default value is 10 sec.

2.“SCAN ” is the scan interval between one KVM port hopped to the next KVM port. The default SCAN time is 10 sec and the maximum scan time is 99 sec.

3.“CHANGE PASSWORD” allows the user to change the password used to access all comput- er systems connected to the KVM. The default password is 8 digits “ 00000000”.

4.“CONSOLE ON/OFF“ lets you select the console access of the KVM switch. If you select “CONSOLE ON“, any user can use the console. If you select “CONSOLE OFF“(factory default is OFF state), a password must be entered to use the console. When you enter the password and pass the KVM switch authentication, the CONSOLE will be set to ON. After you finish using the KVM switch, please do not forget to set the CONSOLE ON state to OFF for password authentication. ( Note: If you reset the KVM switch, or there is a power failure, the CONSOLE will be set at the OFF state. )

5.When you finish the set-up of computer system name and exit the OSD setting mode, you will find the computer name at the upper-left corner of the monitor. You can clear the mes- sage right away by pressing ESC key if you don’t need it.

6.If you want OSD to return back to the factory default settings, you can execute “SCROLL LOCK”, “SCROLL LOCK”, “R” keys in order. The Display LEDs on the front panel will be flashed during the refresh process.

When the OSD returns to default settings, the Display LEDs on the front panel will stop flashing.

17

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Stackable TWO-CONSOLE Port / 16 portFreedom9 Inc. 1 Year Limited Warranty Table of Contents Introduction Features Model No. Two-console 16 port PS/2 KVM SwitchAll Female Types Console Port Connector Local Console Model No Two-Console 16 port PS/2 KVM Switch Cable Diagrams Computer Port Special Cable AT to PS/2 keyboard adapter OptionalDaisy Chain Cable PS/2 Cable VGA CableLocal Console Hardware InstallationStep Remote Console Extending your computer console up to 500 feet awayOptional Hardware Installation Master Bank Slave Bank Maximum 8 Levels Console Operation Selecting Computer Using Hot Key Below are the hot key commands listSelecting Computer through Hot Key Example ExampleHot Plug Function OSD Operation Details Use up arrow key or down arrow key to select KVM port Use PgUp or PgDn key for selecting previous or next Bank NoPress Insert key for editing computer name Press Tab key to select Bank, OSD, Scan…etcConsole Operation Troubleshooting Certifications CE CertificatePage Freedom9 Inc
Top Page Image Contents