Freedom9 KVM-08H, KVM-16H user manual Hardware Installation

Page 12

Chapter 2: Hardware Installation

Step 7

Check all of the connections carefully. The keyboard and mouse connectors are color coded to help in connecting the keyboard and mouse cables to the correct ports.

Step 8

Attach the power supply to the KVM unit and plug the other end into an electrical receptacle. Now you will see the LED for Port 1 light up, and you will hear a beep. Switch on your monitor.

NOTE:

Though the computers connected to KVM Switch are able to support enough power to the stand alone switch, it is suggested that the power adapter be plugged in. The KVM Switch will need a power adapter to daisy chain more banks and if you forget to plug in the power adapter on the status of daisy chain, it may cause unexpected operation.

9

Image 12

Contents Stackable TWO-CONSOLE Port / 16 portFreedom9 Inc. 1 Year Limited Warranty Table of Contents Introduction Features Model No. Two-console 16 port PS/2 KVM SwitchAll Female Types Console Port Connector Local Console Model No Two-Console 16 port PS/2 KVM Switch Cable Diagrams Computer Port Special Cable AT to PS/2 keyboard adapter OptionalDaisy Chain Cable PS/2 Cable VGA CableHardware Installation StepLocal Console Remote Console Extending your computer console up to 500 feet awayOptional Hardware Installation Master Bank Slave Bank Maximum 8 Levels Console Operation Selecting Computer Using Hot Key Below are the hot key commands listSelecting Computer through Hot Key Example ExampleHot Plug Function OSD Operation Details Use up arrow key or down arrow key to select KVM port Use PgUp or PgDn key for selecting previous or next Bank NoPress Insert key for editing computer name Press Tab key to select Bank, OSD, Scan…etcConsole Operation Troubleshooting Certifications CE CertificatePage Freedom9 Inc