Freedom9 KVM-16H, KVM-08H user manual Hardware Installation, Step, Local Console

Page 9

Chapter 2: Hardware Installation

Before installation, please make sure all the peripherals and computers have been turned off. The installation below is based on 8 port-Rack Mount KVM Switch. Please follow the same installation procedure for the 16 port Rack Mount KVM Switch.

Step 1

Find a convenient place to put your KVM Switch. Its 19” rack mount form factor makes it ideal to be mounted on a 19” rack. When mounting to a rack, attach the included brackets to the sides of the KVM Switch. Take note of the length of your cables so that your computers, KVM Switch, keyboard, mouse and monitor are distanced properly.

Step 2 (Local Console)

Connect the monitor to the KVM Switch. Connect the attached cable, or the one included with your monitor, to the HDDB-15 female port on the back of the KVM unit marked with the monitor symbol at the CONSOLE connector.

6

Image 9
Contents Port / 16 port Stackable TWO-CONSOLEFreedom9 Inc. 1 Year Limited Warranty Table of Contents Introduction Model No. Two-console 16 port PS/2 KVM Switch FeaturesAll Female Types Console Port Connector Local Console Model No Two-Console 16 port PS/2 KVM Switch AT to PS/2 keyboard adapter Optional Cable Diagrams Computer Port Special CableDaisy Chain Cable PS/2 Cable VGA CableHardware Installation StepLocal Console Extending your computer console up to 500 feet away Remote ConsoleOptional Hardware Installation Master Bank Slave Bank Maximum 8 Levels Console Operation Below are the hot key commands list Selecting Computer Using Hot KeyExample Selecting Computer through Hot Key ExampleHot Plug Function OSD Operation Details Use PgUp or PgDn key for selecting previous or next Bank No Use up arrow key or down arrow key to select KVM portPress Insert key for editing computer name Press Tab key to select Bank, OSD, Scan…etcConsole Operation Troubleshooting CE Certificate CertificationsPage Freedom9 Inc