freeView IP 100 User’s Manual
Adjust the settings for the selected directory.
•Enable sharing on the directory by selecting “Share this folder”.
•Enter a name for the share. A short description for this folder can also be added in the “Comment” field.
•Adjust the permissions if required by clicking on “Permissions”.
•Click “OK” to set the options for this share.
Unix, Solaris, Linux
To access the share via SAMBA, SAMBA has to be configured properly. Either edit the SAMBA configuration file /etc/samba/smb.conf, or use the Samba Web Administration Tool (SWAT) or WebMin to set the correct parameters.
For additional options see the Section titled Options for details.
6.2.3Creating An Image
Floppy Images
Unix, Solaris, Linux
To create an image file, use the “dd” command in the operating system. This is a standard command included with most Unix, Solaris, and Linux distributions.
To create a floppy image file, copy the contents of a floppy to a file using the following command:
dd[ if=/dev/fd0 ] [ of=/tmp/floppy.image ]
In this example, dd reads the entire disc from the device /dev/fd0, and saves the output in the specified output file /tmp/floppy.image.
MS Windows
A third party utility is required to create a floppy disk image. One such utility is RawWrite written by John Newbigin which can be found here:
http://uranus.it.swin.edu.au/~jn/linux/rawwrite.htm
Note that this is a third party software and is only mentioned as a reference and is neither endorsed or supported by freedom9.
43