Freedom9 IP 100 Ethernet Connection, Using a 10 Mbps Connection, Using a 100 Mbps Connection

Page 18

Step 7 (Only required if using a local console)

Connect the keyboard to the PS/2 port marked as keyboard on the console side.

Step 8 (Only required if using a local console)

Connect the mouse to the PS/2 port marked as mouse on the console side.

Step 9

Connect the power supply on to the freeView IP 100.

3.3Ethernet Connection

The rear side of the freeView IP 100 provides a RJ-45 connector for a 10/100 Mbps Ethernet connection.

Using a 10 Mbps Connection

For 10BASE-T Ethernet networks, the Ethernet adapter uses Category 3, 4, 5 or 6 UTP cable. To establish a 10 Mbps connection, the cable must be connected to a 10BASE-T hub.

•Make sure that the cable is wired appropriately for a standard 10BASE-T adapter.

•Align the RJ-45 plug with the notch on the adapter’s connector and insert it into the adapter’s connector.

Using a 100 Mbps Connection

For 100BASE-TX Fast Ethernet networks, the freeView IP 100 supports Category 5 or higher UTP cabling. To establish a 100 Mbps connection, the cable must be connected to a 100BASE-TX hub or switch.

16

Page 17 Page 19
Image 18
Page 17 Page 19
Contents FreeView IP RevCopyright and Trademark Information Table of Contents Rack Mount KIT Installation Diagram List of Figures 10 Nero Selection Dialog Hardware Installation IntroductionVideo Modes Initial IP Configuration KVM Setup ProgramWeb Interface Remote ConsoleAuto Adjust button Sync Mouse buttonWhen The Server Is Operational When The Server Is Non-OperationalFeatures Package ContentsModel No FreeView IP Technical SpecificationsSystem Requirements DescriptionCable Diagrams Connecting The freeView IP 100 To The Host System Operation OverviewStep Only required if using Virtual Media Only required if using a local console InternetUsing a 10 Mbps Connection Using a 100 Mbps ConnectionEthernet Connection FreeView IP 100 User’s Manual FreeView IP 100 Setup Program Initial ConfigurationInitial Configuration Via Dhcp Server Parameter ValueInitial Configuration Via Serial Console Setup UtilityIP auto configuration none/dhcp/bootp dhcp Keyboard, Mouse And Video ConfigurationFreeView IP 100 Keyboard Settings Net maskRemote Mouse Settings Auto Mouse Speed And Mouse SynchronizationHost System Mouse Settings Single And Double Mouse ModeRecommended Mouse Settings MS Windows 2000/2003 Professional and Server, XP SUN SolarisPrerequisites TelnetLogging In And Logging Out Http//IP address of freeView IPHttps//IP address of freeView IP Navigation MainLogging Out General descriptionMain Window Remote Console Control BarCtrl+Alt+Delete Single/Double Mouse Mode OptionsExclusive Access Monitor OnlyScaling Video Settings Mouse HandlingLocal Cursor Video Settings Through The Web Interface Video Settings Through The Remote ConsoleSoft Keyboard ShowMapping Local Keyboard HotkeysEncoding 13 Remote Console Confirmation DialogRemote Console Status Line Status lineRemote Control KVM ConsoleTelnet Console Telnet ConsoleFloppy Disk Command DescriptionVirtual Media Upload a Floppy ImageCD-ROM Image Use Image on Windows Share SambaVirtual CD-ROM Image Screen Windows 2000/XP Windows Explorer Context MenuFloppy Images Unix, Solaris, Linux Creating An ImageUnix, Solaris, Linux MS WindowsCD-ROM/ISO Images Unix, Solaris, Linux RawWrite for Windows Selection DialogDriver Installation Drive RedirectionPage 12 KVM Vision Viewer Setup Create a New Device13 Create a New Device Drive Redirection Settings 15 New Device AddedOptions 18 Drive Redirection CompletedChange Password User ManagementKVM Settings Users And Groups22 User Console Settings Part User Console22 User Console Settings Part Miscellaneous Remote Console Settings 23 Keyboard and Mouse Settings Keyboard/MouseMiscellaneous Video Settings VideoMouse Speed Device Settings Network25 Network Settings Dynamic DNS 26 Dynamic DNS27 Dynamic DNS Scenario Security 28 Device Security29 Certificate Settings Certificate30 SSL Certificate Upload Serial Port 31 Serial PortPage Date And Time 32 Date and TimeEvent Log 33 Event LogFreeView IP 100 User’s Manual Maintenance Device Information 34 Device InformationUpdate Firmware 36 Event Log ListPage Unit Reset 38 Unit ResetTroubleshooting Certificates CE CertificatePin Assignments Key Codes Figure B-1 English US Keyboard Layout Rack Mount Kit Installation Diagram

IP 100 specifications

The Freedom9 IP 100 is a revolutionary device in the realm of networking and telecommunications, offering advanced features designed to meet the demands of modern communication systems. This device stands out for its robust capabilities and versatility, making it suitable for various applications including VoIP services, data transmission, and multimedia streaming.

At the heart of the Freedom9 IP 100 is its highly efficient VoIP technology. It supports SIP (Session Initiation Protocol) which streamlines the process of initiating, maintaining, and terminating real-time voice and video sessions over the Internet. This ensures high-quality communication, significantly reducing latency and enhancing clarity during voice calls. With multiple concurrent call capabilities, the IP 100 can handle numerous calls simultaneously without compromising on performance.

One of the key features of the Freedom9 IP 100 is its user-friendly interface. The device is designed with intuitive controls and a sleek display, making it accessible for users of all technical backgrounds. This simplicity is complemented by advanced configuration options, allowing IT professionals to customize settings based on specific organizational needs. Enhanced security protocols, including encryption and firewall features, protect against unauthorized access, ensuring data integrity and user privacy.

The IP 100 also boasts extensive compatibility with various devices and platforms, enabling seamless integration within existing communication infrastructures. This flexibility extends to its support for a wide range of codecs, providing options for both high-definition audio and standard quality depending on bandwidth availability. As a result, organizations can optimize their setup for either quality or resource utilization.

Power over Ethernet (PoE) capability is another significant feature of the Freedom9 IP 100. This allows for a single cable to provide both power and data connectivity, simplifying installation and reducing clutter in networking environments. Coupled with robust performance in both wired and wireless settings, the Freedom9 IP 100 truly adapts to the user's surroundings.

In terms of design and durability, the Freedom9 IP 100 is constructed to withstand the rigors of daily use, making it an excellent choice for both office and field deployments. Its compact form factor allows for easy placement in diverse locations, while the aesthetic design ensures it fits well within modern workspaces.

In summary, the Freedom9 IP 100 is a cutting-edge solution for businesses seeking reliable and efficient communication tools. With its VoIP capabilities, user-friendly interface, extensive compatibility, and rugged design, it represents an exceptional investment for enhancing communication strategies.
Top Page Image Contents