Freedom9 G2400 user manual Configuration, Installing the Web Management Utility, Discovery List

Page 11

6 Configuration

You can configure features such as VLANs, trunking, and QoS using the Switch’s web interface.

With the provided Web Management Utility, you can easily discover all the Web Smart Switches on your network, assign IP addresses to them, change the admin password, and upgrade the firmware.

6.1Installing the Web Management Utility

The following gives instructions guiding you through the installation of the Web Management utility. 1. Insert the Utility CD in the CD-ROM Drive.

1.From the Start Menu on the Windows desktop, choose “Run…”

2.In the “Run…” dialog box, type D:\setup.exe (Where “D:\” is the drive letter of your CD-ROM drive) and click “OK”.

3.Follow the on-screen instructions to install the utility.

4.Upon completion, go to Program Files Æ Web Management_Utility and run the Web Management Utility. (Figure 7.)

Figure 7: Web Management Utility

The Web Management Utility is divided into four parts: Discovery List, Monitor List, Device Setting and Toolbar. The sections below provide details for each section.

6.2Discovery List

This window displays the list of recognized Web Smart switches that are connected to the network.

Click the “Discovery” button to begin searching for Switches on the network. This process may take some time, depending on your network configuration.

Once the Switches have been discovered, double-click on an entry, or select a switch and click the “Add to monitor list” button to move a Switch from the Discovery List to the Monitor List.

Column Heading Definitions:

MAC Address: The Switch’s MAC Address.

IP Address: The current IP address of the device.

Image 11
Contents S112410000 Rev FreeConnect Smart G2400Copyright and Trademark Information Table of Contents Terms/Usage About This GuidePurpose Vlan Virtual Local Area Network IntroductionGigabit Ethernet Technology Fast Ethernet TechnologyFeatures Rack Mounting Unpacking and InstallationInstallation UnpackingAC Power Connecting Network CableRear Panel Identifying External ComponentsFront Panel Ports 1~24 Status LEDs Understanding LED IndicatorsPower and System LEDs Column Heading Definitions ConfigurationInstalling the Web Management Utility Discovery ListSystem word definitions in the Monitor List Monitor ListTrap Information Device SettingToolbar Configuring the SwitchEntering the IP Address LoginDevice Status Main Menu Configuring Setup SettingPort Settings Flow Control Speed/DisableQoS Quality of Service Trunk Setting Vlan Settings Virtual Local Area NetworkMaintenance Settings Mirror SettingDevice Status Restore SettingStatistics StatisticsDetailed Port Statistics System SettingSystem Setting Trap SettingReset Setting Set PasswordBackup Setting Logout Reset SettingPerformance Technical SpecificationsGeneral CE Certificate Certifications