Juniper Networks M120 manual Adaptive Services II Layer 2 Services PIC

Adaptive Services II Layer 2 Services PIC

Adaptive Services II Layer 2 Services PIC

Software release	■ JUNOS 8.0R2 and later (Type 1)
	NOTE: This PIC is not supported in JUNOS Release 8.1R1.

Description	■ Supports Layer 2 Service package only. Tunnel services are included with the PIC. Other
	services require an individual license.
	■ Power requirement: 0.4 A @ 48 V (19 W)
Hardware features	■ Support for up to 2000 service sets
	■ Support for MTUs up to 9192 bytes for Gigabit Ethernet and SONET interfaces
Software features	Depending on your JUNOS release and individual licenses, software features for this PIC can
	include the features listed in Table 8 on page 18. For more information about the software
	features available for services PICs, see the JUNOS Services Interfaces Configuration Guide.
LEDs	Status LED, one tricolor:
	■ Off—PIC is offline and it is safe to remove it from the chassis.
	■ Green—PIC is operating normally.
	■ Amber—PIC is initializing.
	■ Red—PIC has an error or failure and no further harm can be done by removing it from
	the chassis.

Application LED, one bicolor:

■Off—Service is not running.

■Green—Service is running under acceptable load.

■Amber—Service is overloaded.

Adaptive Services II Layer 2 Services PIC ■ 17