Juniper Networks 204, 5200, 208, 500, 5XT, 5400 manual Version Summary

Juniper Networks NetScreen Release Notes

5.Known Issues on page 29

5.1Limitations of Features in ScreenOS 5.0.0 on page 29

5.2Compatibility Issues in ScreenOS 5.0.0 on page 30

5.2.1Upgrade Paths from Previous Releases on page 31

5.3Known Issues in ScreenOS 5.0.0 on page 32

5.3.1Known Issues in ScreenOS 5.0.0r9-FIPS on page 32

5.3.2Known Issues from ScreenOS 5.0.0r8 on page 33

5.3.3Known Issues from ScreenOS 5.0.0r7 on page 34

5.3.4Known Issues from ScreenOS 5.0.0r6 on page 34

5.3.5Known Issues from ScreenOS 5.0.0r5 on page 34

5.3.6Known Issues from ScreenOS 5.0.0r4 on page 34

5.3.7Known Issues from ScreenOS 5.0.0r3 for the 5000-M2 on page 35

5.3.8Known Issues from ScreenOS 5.0.0r3 on page 36

5.3.9Known Issues from ScreenOS 5.0.0r2 on page 36

5.3.10Known Issues from ScreenOS 5.0.0r1 on page 36

5.3.11Known Issues from Previous Releases on page 40

6.Getting Help on page 41

1.Version Summary

Juniper Networks NetScreen ScreenOS 5.0.0r9-FIPS is the latest version of ScreenOS firmware with FIPS mode for the Juniper NetScreen-5XT, Juniper NetScreen-200 Series security appliances, the Juniper NetScreen-500, and the Juniper NetScreen-5000 Series security systems.

The ScreenOS 5.0.0r9-FIPS release is interoperable with, and provides basic support for, all versions of NetScreen Remote and ScreenOS 2.6.1 and later versions. This version of ScreenOS is fully supported by Security Manager, Juniper Networks-NetScreen's security management platform.

This version of ScreenOS also supports selection of either the Baseline or Advanced version of the firmware. To access a specific Advanced feature, you need to purchase the appropriate Advanced feature key.

ScreenOS 5.0.0r9-FIPS P/N 093-1638-000, Rev. A Page 2 of 42