Zoom manual PD-01 and Multi-Effects, Creating drive sound with PD-01 only

Page 11

PD-01 and Multi-Effects

This section shows how to use the PD-01 together with multi-effect devices such as the GFX-4.

Creating drive sound with

PD-01 only

When using a multi-effect device with the PD-01, the PD-01 should be connected before the other device. For distortion sound, create the distortion with the PD-01 only.

Using send/return loop of multi-effect

When using a multi-effect device such as the GFX-8 with send/return jacks, the PD-01 can be used as if it were a part of the other device. You can switch the PD-01 on and off using patch programs of the multi-effect.

ZOOM Power Drive PD-01 11

Image 11

Contents Zoom Power Drive PD-01 Use as full-fledged booster FeaturesMechanical switch for on/off and true bypass Unprecedented warm and full overdriveSturdy metal chassis HIGH/LOW equalizer provides versatilityThis section explains the various parts of the PD-01 Parts and FunctionsHigh control Connections How to connect the PD-01Connect output cable to amplifier Boost sound emphasizing amp distortion Sound SamplesStandard overdrive sound Booster sample 2 drive & distortion Clean sound with a fat characterBooster sample 1 clean & crunch With compressor & chorus With chorus & delayPD-01 and Compact Effects Creating drive sound with PD-01 only Using send/return loop of multi-effectPD-01 and Multi-Effects Noise is heard TroubleshootingNo sound Cannot produce the desired sound Battery gets used up very quicklyDistortion is not strong enough. Sound is not clear Output SpecificationsElectrical interference Usage PrecautionsAbout power Safety Precautions