Zoom manual Connections, How to connect the PD-01

Page 6

Connections

Open cover of battery		Turn amplifier off and connect cable
1. compartment and insert battery		2. to guitar

Take care to snap the battery to the connector with correct polarity.

Make sure that the plug is inserted fully into the OUT jack of the guitar.

Plug cable from guitar into IN jack

3. of PD-01

Insert the cable from the guitar into the IN jack of the PD-01. This turns the PD-01 on.

6ZOOM Power Drive PD-01

Image 6

Contents Zoom Power Drive PD-01 Unprecedented warm and full overdrive FeaturesMechanical switch for on/off and true bypass Use as full-fledged boosterHIGH/LOW equalizer provides versatility Sturdy metal chassisParts and Functions This section explains the various parts of the PD-01High control How to connect the PD-01 ConnectionsConnect output cable to amplifier Sound Samples Standard overdrive soundBoost sound emphasizing amp distortion Clean sound with a fat character Booster sample 1 clean & crunchBooster sample 2 drive & distortion With chorus & delay PD-01 and Compact EffectsWith compressor & chorus Using send/return loop of multi-effect PD-01 and Multi-EffectsCreating drive sound with PD-01 only Troubleshooting No soundNoise is heard Battery gets used up very quickly Distortion is not strong enough. Sound is not clearCannot produce the desired sound Specifications OutputUsage Precautions Electrical interferenceSafety Precautions About power