Zoom PD-01 manual Connect output cable to amplifier

Page 7

Connect another cable to the OUT jack of the PD-01. Make sure that the plug is inserted firmly.

Turn power to the amplifier on, and raise the LEVEL control on the guitar and PD-01.

5. Connect output cable to amplifier

Plug the cable from the OUT jack of the PD- 01 to the IN jack of the amplifier.

If steps are performed in reverse order, there is a danger of damage to the amplifier or speakers.

ZOOM Power Drive PD-01 7

Image 7

Contents Zoom Power Drive PD-01 Use as full-fledged booster FeaturesMechanical switch for on/off and true bypass Unprecedented warm and full overdriveSturdy metal chassis HIGH/LOW equalizer provides versatility This section explains the various parts of the PD-01 Parts and FunctionsHigh control Connections How to connect the PD-01Connect output cable to amplifier Standard overdrive sound Sound SamplesBoost sound emphasizing amp distortion Booster sample 1 clean & crunch Clean sound with a fat characterBooster sample 2 drive & distortion PD-01 and Compact Effects With chorus & delayWith compressor & chorus PD-01 and Multi-Effects Using send/return loop of multi-effectCreating drive sound with PD-01 only No sound TroubleshootingNoise is heard Distortion is not strong enough. Sound is not clear Battery gets used up very quicklyCannot produce the desired sound Output SpecificationsElectrical interference Usage PrecautionsAbout power Safety Precautions