Zoom PD-01 manual High control

Page 5

1IN jack

The input of the unit acts as a power switch. When you connect the plug of the cable from the guitar here, the unit is turned on.

2OUT jack

This is the output of the unit. Connect the plug of the cable going to the guitar amplifier or other effect device here.

3AC adapter jack

When powering the unit from the AC adapter, insert the plug from the adapter into this jack. Be sure to use only an AC adapter rated for 9 V DC, center negative, 300 mA (Zoom AD-0006). When the AC adapter is connected, the PD-01 will always be ON, regardless of whether a cable is plugged into the IN jack.

4GAIN control

Turning this control clockwise increases the drive effect. In the zero position, there is no distortion.

5LEVEL control

This control adjusts the output signal level. Turning the control clockwise increases the level.

6HIGH control

This control adjusts the high frequency range.

7LOW control

This control adjusts the low frequency range.

8Indicator

Illuminates when the PD-01 is active.

9Foot switch

Switches the PD-01 effect on and off.

10Battery compartment

A 9V battery (6F22) can be inserted here.

ZOOM Power Drive PD-01 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Zoom Power Drive PD-01 Mechanical switch for on/off and true bypass FeaturesUnprecedented warm and full overdrive Use as full-fledged boosterSturdy metal chassis HIGH/LOW equalizer provides versatilityThis section explains the various parts of the PD-01 Parts and FunctionsHigh control Connections How to connect the PD-01Connect output cable to amplifier Boost sound emphasizing amp distortion Sound SamplesStandard overdrive sound Booster sample 2 drive & distortion Clean sound with a fat characterBooster sample 1 clean & crunch With compressor & chorus With chorus & delayPD-01 and Compact Effects Creating drive sound with PD-01 only Using send/return loop of multi-effectPD-01 and Multi-Effects Noise is heard TroubleshootingNo sound Cannot produce the desired sound Battery gets used up very quicklyDistortion is not strong enough. Sound is not clear Output SpecificationsElectrical interference Usage PrecautionsAbout power Safety Precautions
Top Page Image Contents