B&B Electronics TPC-1261H user manual Packing List, Safety Instructions

Packing List

Before setting up the system, check that the items listed below are included and in good condition. If any item does not accord with the table, please contact your dealer immediately.

•1 x TPC-1261H-A1

•8 x Panel mounting clampers

•8 x Panel mounting screws

•1 x 3-Pin power connector

•1 x TPC x86 Series support CD

•1 x CompactFlash to IDE adapter board

Safety Instructions

1.Read these safety instructions carefully.

2.Keep this User's Manual for later reference.

3.Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for clean- ing.

4.For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible.

5.Keep this equipment away from humidity.

6.Put this equipment on a reliable surface during installation. Drop- ping it or letting it fall may cause damage.

7.The openings on the enclosure are for air convection. Protect the equipment from overheating. DO NOT COVER THE OPENINGS.

8.Make sure the voltage of the power source is correct before con- necting the equipment to the power outlet.

9.Position the power cord so that people cannot step on it. Do not place anything over the power cord.

10.All cautions and warnings on the equipment should be noted.

11.If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient overvoltage.

12.Never pour any liquid into an opening. This may cause fire or elec- trical shock.

v