Zoom CableModem user manual USB Cable Modem Driver Installation

After the modem completes a self-test, it synchronizes with the cable network. During this process, the SYNC light blinks, rapidly at first, then slowly. The USB and ACT lights may flicker briefly.

Note: Synchronization may take several minutes.

When the process is complete, the SYNC light becomes steady On. For details on the front panel lights and their modes, see Appendix A on page 23.

Now follow the steps below to install the driver.

USB Cable Modem Driver Installation

1 Restart your computer.

2 Insert the Zoom USB Cable Modem CD into your CD-ROM drive. The CD will run automatically. (If it doesn’t, select My Computer on your desktop. Then select the icon for your CD-ROM drive.)

3 At the Zoom Cable Modem Main Menu, select Install Cable Modem Drivers.

4 At the Zoom Cable Modem Driver Installation screen, select USB, and then follow the prompts.

Installing Your Cable Modem 9