Appendix A: Legal Notices and Certification
CLASS 1 LASER Product:
Complies with 21 CFR 1040.10 and 1040.11.
FCC Class A Notice: | NETBLASTER ZX222 |
Modification to this product not authorized by ZNYX Corporation could void the FCC approval and negate your authority to operate the product.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if it is not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Canada Compliance:
This Class A digital apparatus complies with Canadian
Cet appareil numeriqué de la classe A est conforme à la norme
CE Conformity:
The ZX222 is in compliance to CE testing according to the following standards with respect to the stated level and given criteria:
EN55022 |
|
| |
EN55022(1998) | Class A |
4kV (Contact Discharge) and 8kV (Air Discharge) | |
3V/m | |
ENV 0204 (1995) |
|
1kV (power Supply) and 0.5 kV (I/O Cables) | |
1kV (Line to Line) and 2kV (Line to Ground) | |
3Vrms | |
0%, 40%, 70% of UT, voltage dips |
THIS ADAPTER CARD IS FOR USE ONLY WITH PMC BUS COMPATIBLE SYSTEMS THAT HAVE ENCLOSED POWER SUPPLIES WITH SELV OUTPUTS AND INSTALLATION INSTRUCTIONS DETAILING USER INSTALLATION OF CARD CAGE ACCESSORIES.
Manufacturer Name: ZNYX Corporation
Manufacturer Address: 48501 Warm Springs Boulevard, Suite 107
Fremont, CA 94539
ZNYX Networks NetBlaster ZX222 PMC Fast Ethernet Adapter · User’s Guide | Page 8 |