Buffalo Technology WLI-TX4-G54HP user manual Configuration without PC Software

Page 11

Configuration without PC Software

You may also enter the Web-based Configuration Tool without using the software. This may be necessary to configure the converter without the use of a Windows PC. Use this method with Linux, Macintosh, other other non-Windows PCs to access the Web-based Configuration Tool.

Refer to your operating system documentation on how to configure a Static IP address. The Ethernet Converter has an IP address of 1.1.1.1 by default. You'll need to configure the computer to be on the same subnet; an IP address of 1.1.1.2 is recommended for the computer.

With the included network patch cable, connect one of the Ethernet Converter's LAN ports to an open Ethernet port on a router, switch, or hub on your network. Alternately, you can plug the Ethernet Converter directly to the configuring computer's Ethernet port.

Once the network cable has been plugged in, plug the Ethernet Converter's AC Adapter into an available power outlet. Then attach the power connector to the back of the Ethernet Converter. The boot process takes less than a minute and is completed when both the Wireless and Ethernet lights are lit.

11

Image 11
Contents WLI-TX4-G54HP Table of Contents Contents Getting Started Aoss Installation Manual Configuration Configuration with Ethernet Converter Manager Page Page Page Configuration without PC Software Page Network Name table Web-Based Configuration ToolPage Page Page Advanced Settings Wireless Settings Wireless Settings Network Settings Management Management Management Init button TroubleshootingPage        WarrantyGeneral Inquiries Contact Information North AmericaContact Information Europe GPL Information North America GPL Information Europe
Related manuals
Manual 13 pages 29.63 Kb