Wireless Settings

Frame Bursting Mode - Frame Bursting technology allows for quicker wireless network speeds by reducing the overhead for each wireless packet. If your access point supports it, 125* High-Speed Mode offers the best overall performance of the frame bursting modes. You may leave this set to the 125* High Speed Mode at all times; if a compatable access point is not available then the device will operate as a standard 802.11g device.

Wireless Output Power - The wireless output power setting changes the power of the Ethernet Converter's internal radio. Reducing the output power can often reduce interference with other devices. You should leave the output power set at 100% unless you want to reduce range or interference with other 2.4 GHz devices is apparent.

Data Encryption - Select WEP 64, WEP 128, TKIP, or AES encryption from the dropbox. If WEP is selected, then a WEP key or series of WEP keys must be entered into the WEP key field(s). Please select whether the specific key is ASCII or HEX from the pull down list next to the key fields. If TKIP or AES is used, then enter the pre-shared key in the WPA-PSK field.