Management
Configuration Limitations - Limits what kind of clients may configure the Ethernet Converter. Checking Prohibit Configuration from Wireless Clients prevents changes to configuration by clients that are not connected directly to the Ethernet Converter. Checking Prohibit Configuration from Wired Clients prevents configuration changes being made by any client that is directly connected to the Ethernet Converter's LAN ports. Checking both boxes makes all further configuration impossible. The Ethernet Converter must then be initialized before any changes to configuration can be made. Be careful with these checkboxes!
Initialization and Reboot - This page contains settings that restart and
Initialize - Initializing the Ethernet Converter restores the Ethernet Converter's settings to default settings. This will erase all configuration changes made, including all passwords. All configuration will have to be redone as though the product were brand new. You may also initialize the Ethernet Converter with the INIT button; see page 24.
Restart - Restarting the Ethernet Converter performs a simple reboot similar to what would occur if the power was cycled off/on
the Ethernet Converter. No settings are lost in this case. It will take about
22